Getting Started | Motorola MD790 Series specification

Getting Started

Before you can use your telephone to make or answer calls, you must charge the battery. This section provides the step-by-step instructions you will need.

Battery Safety Instructions

• Do not burn, disassemble, mutilate, or puncture the battery. The battery contains toxic materials that could be released, resulting in injury.

UNCONTROLLED
•	Caution: There is a risk of explosion if you replace
	the battery with an incorrect battery type. Use only the
	battery that came with your phone or an authorized
	replacement recommended by the manufacturer.
•	Keep batteries out of the reach of children.
•	ContactDOCUMENTyour local
•	Remove batteries if storing over 30 days.
• Do not dispose of batteries in fire, which could result
	in explosion.
•	The rechargeable batteries that power this product
	must be disposed of properly and may need to be
	recycled. Refer to your battery’s label for battery type.
	recycling center for proper disposal methods.
Getting Started

1

Image 17

Motorola MD790 Series manual Getting Started, Battery Safety Instructions

Contents

Uncontrolleddocument Congratulations on your purchase of a Motorola product WelcomeHandset Overview Soft KeysDOCUMENT Base Unit Controls Iii Or contact us at Welcome Table of Contents UNCONTROLLEDUsing the Intercom Vii Viii Important Safety Instructions Damage to the product With your dealer or local power companyDo not place this product on an unstable cart, stand Nearby persons Among other information, a product identifier in the form FCC InformationOn the bottom of this equipment is a label that contains Xii Operation This device complies with Part 15 of the FCC RulesThis equipment has been tested and found to comply Xiii Xiv Hearing Aid Compatibility Getting Started Battery Safety Instructions Charging the Battery For the initial charge, charge the battery for Installing Backup BatteriesRest the handset in the base so the charging LED lights Backup batteries Base display has a battery meter to show statusReplace the compartment cover by inserting Tabs of the cover into the slots on the base unit Installing the Corded Handset Main display Using the PhoneWhen the speakerphone is on, V displays. GettingStarted UNCONTROLLEDUsing the Soft Keys Using the Navigation Key Installing the Phone on a Desk Installation Installing the Phone on the Wall Uncontrolled Personalizing Your Phone Setting UpSetting the Ring Volume Setting the Ring Tone When your choice displays, press SE ECT Setting Key Beeps On or OffOn when the ringer is on, and off when the ringer Scroll through the options ON, FF, or Inked to Ringer Naming Your Handset and Base Unit Scroll to Name handset using your handset Scroll toName base on base unit Enter the name you want to use up to First letter of the entry is an uppercase letter. o Uncontrolled Storing Area Codes for Caller ID Select Setting the Date and TimeScroll to Date/Time and select Select Select Change to select date format Or DD/MM Setting Touch Tone or Pulse Dialing Setting the Language Making a Call Using the PhoneEnding a Call Answering a Call Uncontrolled Adjusting the Volume During a Call Press Dial Using Automated Dialing When the speakerphone is on, Vappears on Using the SpeakerphoneTo adjust the speakerphone volume, press Use the speakerphone Putting a Call on Hold Muting a CallRedialing a Number Finding a Lost or Misplaced Handset PhoneUNCONTROLLED Storing a New Number Using the PhonebookSelect Phonebk Enter the name up to 12 characters. Scroll down Storing a Caller ID Number Storing a Recently Called Number Editing a Phonebook Entry Deleting a Phonebook Entry Unsorted or reset to its previous list orderSorting the Phonebook Phonebook to sort entries alphabetically Calling a Number from the Phonebook Copying a Phonebook Entry Handset can store up to 40 Caller ID records Using Caller IDReviewing the List of Caller ID Calls Deleting Caller ID Calls Multihandset Functions To end an intercom session, press Using the IntercomAnswer is displayed on your handset and paging stops After three rings Enabling Auto-Answer Conference Calling Transferring Calls to Other Handsets Handset being monitored automatically answers Monitoring a RoomIntercom automatically pages the handset Using the Answering Machine Setting Up Your Outgoing Message OGM Setting Up the Answering MachineTurning the Answering Machine On or Off Recording an utgoing Message Or after five rings when there are no new messages Call after three rings when new messages are presentUsing this feature, if you call long distance to check Scroll to and select Ring Number Recording a Memo Setting the Security ID NumberSetting Voice Prompts Checking Messages from the Base Unit Using the Answering MachineSetting Recording Quality Checking Messages from a Cordless Handset UNCONTROLLED0 Erasedocument Machine Answering Checking Messages Remotely With Message Forwarding activated, the next time a Phone number you specified. When you answerMessage Forwarding Screening Calls Deregistering an Expansion Handset New Expansion HandsetsRegistering a New Expansion Handset Press OK to register another handset, or press Exit What Does this Warranty Cover? Motorola Limited Warranty Exclusions Who is Covered What Other Limitations Are There? Mgbi