Installation
10
Preparing the Handset
Inserting and Charging the Batteries
On the bottom of the handset, press in the release catch in between the two charging connectors and push the battery hatch up to remove. Insert the 2 x AAA (600mAh/1.2v)
Please do not put the cordless handset onto the charger without first inserting the batteries.
The handset will not function and may become damaged.
Please do not use alkaline or
batteries. It may cause permanent damage to the product and void the warranty.
Locate the top of the battery cover first and press down towards the release catch until it clicks into place. Place the handset onto the base station to charge the batteries for a minimum of 16 hours before first use. You will hear a confirmation beep, the battery charging indicator will start to scroll and ‘Charging’’ will initially appear on the display to confirm that the handset is charging.
When the handset is fully charged, the full battery 
icon will be displayed until the handset is taken off of the base station.
Note: Before first use the batteries should be allowed to charge for a minimum of 16 hours, without interruption. If possible, only take the handset out of the base station when charging is complete. This will help to guarantee optimum operation.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES
ACCORDINGTOTHE INSTRUCTIONS.
Use only SANIK; type no,
