bootable disc for the downloaded ISO1 file. This procedure assumes Nero 8 Essentials will be used, but Nero 7 operation is similar, and most CD/DVD burning software can write ISO files to disc.
CD or DVD Media A blank
CD Reader If the ML910 notebook does not already have its own Combo or Dual drive installed, you can either temporarily install one in its media bay or use an external drive connected through one of the notebook’s USB2 ports.
Experience in Performing Upgrade Procedures These instructions are written with the understanding that the person performing the upgrade is already familiar with the terms and similar computer support procedures, and is able to adapt to variations that may be encountered, due to
Caution
It is critically important that the EC BIOS procedure be performed with the utmost care. Among other precautions, make sure the ML910 is securely plugged into a reliable AC power source. If this FLASH procedure should be interrupted and fail, there is no “undo” or recovery procedure. The ML910 would need to be returned to Motorola’s Service Depot for repair.
Support If you are unsure of any step in this procedure or otherwise need Motorola support, please call the Motorola System Support Center (SSC) at
1ISO (International Organization for Standardization) refers to a standardized file format (.iso) used for optical discs.
2USB (Universal Serial Bus) refers to the standard serial interface receptacles found on most newer computers. The ML910 notebook includes three USB ports.
2 | ML910 R1.0 RF |
