Motorola ML910TM manual ML910 R1.0 RF Pass-through Upgrade Procedure, Version A

5.Launch the ML User Application.

6.Select the RF Pass-through option available in the MLUA.

7.Before the RF Pass-through User Control in MLAA is changed to [Enable], the RF Pass-Through Control will be grayed-out.

8.After the RF Pass-through User Control in MLAA has been set to [Enable], the default setting will be [Automatic Selection].

9.User can select [Manual Selection] to either Enable or Disable the RF Pass-Through. [Apply] needs to be pressed by User in order to make the selection valid.

10.Enabling the RF Pass-Through will disable the Internal Antenna and vice versa.

1 2

3 4

20 ML910 R1.0 RF Pass-through Upgrade Procedure, Version A