Introduction: Standard Accessories | |
|
|
1.If the battery door is already in place, push down on the recess on the door and slide it off the radio.
2.Insert the battery, printed arrows first, into the battery compartment and press down to secure firmly in place.
3.Slide and snap the battery door into place.
Graphic Placeholder
Swivel Belt Holster
1.Slide the bottom of radio into the holster until it snaps into place.
2.To remove, push the tab above the battery door and pull the radio from holster.
Graphic Placeholder
NOTE: In case of loss, please contact your
Universal Connector Cover
9980384R89 | July 23, 2004 |