6.3Change base PIN code
Some functions are protected by a 4 digit PIN code which must be entered if you want to change the settings. The default PIN is 0000. You can change this to your own preferred number.
When you enter a PIN, the digits are shown as ****.
1.Press m, scroll dto SETUP and press m.
2.Scroll dto PIN CODE and press m.
3.Enter the 4 digit PIN code (default = 0000) and press m.
4.
5.The display shows RETYPE.
IMPORTANT
If you change the PIN code, please keep a record of the new number.
6.4Dial mode
Your S12 is set to tone dialling. You should only need to change this if connected to an older type of switchboard/PBX which requires Pulse dialling.
1.Press m, scroll dto SETUP and press m.
2.Scroll dto DIAL MODE and press m.
3.Press uor dto select TONE DIAL or PULSE DIAL and press mto confirm.
Base settings
6.5Recall mode
Depending on your country and network operator, your S12 has the recall time set as 600 ms (TIMED BR, 2). It is unlikely that you need to change this setting unless advised to do so.
1.Press m, scroll dto SETUP and press m.
2.Scroll dto RECALL and press m.
3.Press uor dto select TIMED BR,1(short flash time) or TIMED BR,2 (long flash time) and press m to confirm.
6.6Restore default settings
You can restore your S12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Phonebook and Calls list. All handset and base settings will also be reset.
1.Press m, scroll dto SETUP and press m.
2.Scroll dto DEFAULT and press m.
3.Enter the 4 digit PIN code (default = 0000) and press m. The display shows CONFIRM ?.
4.Press mto confirm or Bto return to the previous menu. Your S12 will restart automatically.
23
