On the handset:
1.Press m, scroll dto REGISTER and press m.
2.Scroll dto REG BASE and press m.
3.Enter the base number (1 - 4).
The base numbers that are already in use flashes. The display shows SEARCHING....
4.When the handset finds the base signal, the display shows SEARCHING...X, where X indicates the base identification number.
5.The display will ask for the PIN to be entered. Enter the 4 digit PIN code (default = 0000) and press m.
You will hear a beep if the registration is successful. The handset is automatically assigned an available handset number. Use this number when making internal calls.
NOTE
If registration is not successful the first time, please repeat the process again in case the base registration period ran out of time. If the base is not found after a few seconds, the handset returns to standby. Try registering again.
If there are already 5 handsets registered to the base, the registration will fail. You must
Using additional handsets
9.2Register a different make of handset to your S12 base
IMPORTANT
DECT GAP Profile only guarantees that basic calling functions will work correctly between different makes/types of handset and base. There is a possibility that certain devices such as Caller ID will not work correctly.
On the base:
1.Press and hold afor 3 seconds until you hear two beeps. The base will remain in registration mode for 90 seconds.
On the handset:
Follow the registration instructions given in your handset’s user guide.
9.3Select a base
If your S12 handset is registered to more than one base (e.g. one at work and one at home), you can select which base to use.
Each handset can be registered with up to four bases.
1.Press m, scroll dto REGISTER and press m. The display shows SELECT BASE.
29
