Please do not use alkaline or non rechargeable batteries. It may cause permanent damage to the product and void the warranty.

BATTERY LOW WARNING

If icon flashes on the display and you hear a warning beep every minute during a call, you will need to recharge the handset before you can use it again.

When charging, icon will scroll on the display. Once fully charged scrolling will stop.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 200 hours standby time on a single charge1.

Note that new batteries do not reach their full capacity until they have been put to normal use for several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours at a time.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/ standby time. Eventually they will need to be replaced.

1All talk and standby times are approximate and depend on features selected and usage pattern.

8

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets when you receive your first call.

If you do not have Caller ID service, you can set the date and time manually.

Set the date manually

1.Press m, scroll d to DATE-TIMEand press m. The display shows DATE SET.

2.Press m to select.

3.Enter the date (e.g. 12--08 for 12th of August) and press mto confirm.

Set the time manually

1.Press m, scroll d to DATE-TIMEand press m.

2.Scroll dto CLOCK SET and press m.

3.Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press mto confirm.

Your S12 is now ready for use.

Getting started

Page 8
Image 8
Motorola S1204, S1201, S1202, S1203 Date and time, Set the date manually, Set the time manually