SURFboard R
Introduction Before You Begin Installation Operation Basic Configuration Troubleshooting
Ethernet to computer
USB to computer
TV cable to cable outlet
Power cord to electrical outlet
You must call your service provider to activate your service. You need to provide the media access control (MAC) address. This address is found on the bar code label marked
HFC MAC ID on the rear panel.
The address format is 00:20:40:xx:xx:xx.
Precautions
•Do not block the ventilation holes on the sides of the modem to prevent it from overheating.
•Do not open the SB4100 cable modem. Refer all service to your local service provider.
•Wipe the modem with a clean, dry cloth. Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the unit
or use forced air to remove dust.
TM
6
