Motorola SBV5121 manual Modem for information about obtaining warranty service

Introduction

Installation

Troubleshooting Glossary License

9After the window shown under step 8 is displayed, click Next.

If a window with the message Copying Files... displays and asks for your CD-ROM drive, type your CD-ROM drive letter (for example, “D:”) and click OK.

If an Insert Disk window similar to the following is displayed, Windows system files are needed to complete the installation. To install the files, insert your Windows 98 Second Edition CD-ROM in the CD-ROM drive and click OK.

After all the necessary files are loaded, the following window is displayed confirming a successful installation.

10Click Finish. The Systems Settings Change window is displayed:

11Click Yes to restart your computer.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows 98 Second Edition, or Windows Me” on page 20.

If you have difficulties setting up the USB driver, perform “Removing the USB Driver from Windows 98 Second Edition or Windows Me” on page 37 and repeat this procedure. If that does not correct your problem, see the

Regulatory, Safety, Software License, and Warranty Information card provided with your SBV5121 VoIP cable

modem for information about obtaining warranty service.

SBV5121 VoIP Cable Modem User Guide 14