Setting the Tone Alert Volume Offset Level
You can adjust the Tone Alert Volume Offset level if needed. This feature adjusts the volume of the tones/alerts, allowing it to be higher or lower than the voice volume.
Procedure:
| 1 | cto access the menu. | |
|
|
| |
| 2 | ^ or vto Utilities and press cto select. | |
| 3 | ^ or vto Radio Settings and press cto select. | |
|
|
| |
| 4 | ^ or vto Tones/Alerts and press cto select. | |
|
|
| |
Features | 5 | ^ or vto Vol. Offset and press cto select. | |
6 | ^ or vto the required volume value. The radio sounds a | ||
| |||
|
| feedback tone with each corresponding volume value. | |
|
|
| |
| NOTE: Press cto keep the required displayed volume value. | ||
Advanced |
| OR | |
| Repeat Step 6 to select another volume value. | ||
|
| ||
OR
dto exit without changing the current volume offset settings.
84
Turning the Talk Permit Tone On or Off
You can enable and disable the Talk Permit Tone if needed.
Procedure:
1cto access the menu.
2^ or vto Utilities and press cto select.
3^ or vto Radio Settings and press cto select.
4^ or vto Tones/Alerts and press cto select.
5^ or vto Talk Permit and press cto select.
6Press cto enable Talk Permit Tone. The display shows 9 beside Enabled.
OR
Press cto disable Talk Permit Tone. The 9 disappears from beside Enabled.
NOTE: At Step 5, you can also use <or >to change the selected option.
