subscriber alias. The second text line displays the call status.
4Wait for the Talk Permit Tone to finish (if enabled) and speak clearly into the microphone.
5Release the PTT button to listen. When the target radio responds, the LED blinks green, the radio unmutes and the response sounds through the radio's speaker.
6If the Channel Free Indication feature is enabled, you will hear a short alert tone the moment the target radio releases the PTT button, indicating the channel is free for you to respond. Press the PTT button to respond.
OR
If there is no voice activity for a predetermined period of time, the call ends.
7You hear a short tone. The display shows Call Ended.
NOTE: If you release the PTT button while the radio is setting up the call, it exits without any indication and returns to the previous screen.
Your radio may be programmed to perform a radio presence check prior to setting up the Private Call. If the target radio is not available, you hear a short tone and see negative mini notice on the display.
Making an All Call
This feature allows you to transmit to all users on the channel. | Making | ||
Your radio must be programmed to allow you to use this | |||
feature. | |||
| |||
Procedure: |
| ||
1 | Select the channel with the active group alias or ID. See | and | |
| Selecting a Channel on page page 22. | ||
|
| ||
2 | Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from | Receiving | |
| your mouth. | ||
|
| ||
3 | Press the PTT button to make the call. The LED lights up |
| |
| solid green. The Group Call icon appears in the top right |
| |
| corner. The first text line shows All Call. |
| |
4 | Wait for the Talk Permit Tone to finish (if enabled) and | Calls | |
| speak clearly into the microphone. | ||
|
| ||
Users on the channel cannot respond to an All Call.
27
