Motorola StarTAC Selecting Call Alert Type, Getting to Tone Controls, Press, Shortcut

Getting to Tone Controls...

1.Press Ä, then press to enter the menu system.

2.	Press	or	to scroll to Tone Control and press to select.
3.	Press	or	to scroll to the following features, and press to
	select.

Selecting Call Alert Type

Using this feature, you can choose to be alerted to incoming calls using the vibrating ringer, the ringer, both, or neither. Ring Only is the default.

In particular, the VibraCall™ Alert vibrating alert is ideal for situations where ringing may not be appropriate, or in noisy places where you might not hear the ringer.

When both the ringer and vibrating alerts are selected, the phone alerts you by vibrating for three cycles and then ringing.

Notes:

•Although you set your call alert type below, the selection is temporarily suppressed if Pager Mode is enabled. See “Activating Pager Mode” on page 87 for details.

•When your phone is connected to an external power supply and you receive an incoming call, your phone will ring, regardless of the call alert setting.

1.Follow the steps in the ”Getting to Tone Controls…” block above to select Call Alert Type.The display shows your current alert type setting.

Shortcut:

Press Ä to toggle the VibraCall™ Alert function on and off.

Tone Controls

71