English | Direct Charge: | |
1. Connect the DC adapter’s plug to the radio’s | ||
| ||
| DC IN 9V jack and plug the other end to a | |
| vehicle's accessory power outlet. | |
| Using the Charging Cradle: | |
| 1. Connect the AC adapter to DC IN 9V and to | |
| a standard electrical outlet. | |
| 2. Set the charging cradle on the desk or | |
| tabletop, and place the radio in the charging | |
| cradle with the keypad facing forward. | |
| 3. Make sure that the LED illuminates. Charge | |
| the battery pack for 16 hours and remove the | |
| radio from the charging cradle after charge. | |
| Note:The charge indicator LEDs will remain | |
| on as long as the radios are left in the | |
| charger. | |
| Charging the battery | |
| You can charge the NiMH battery pack itself | |
| using the included battery support bracket. |
1.Place the battery support bracket into the charging cradle.
2.Install the NiMH battery pack applying its
charging contacts to those of charging
6cradle. Installing the batteries incorrectly will
prevent the unit from charging.
3.Make sure that the LED illuminates. Charge the battery pack for 16 hours .
Note:The charge indicator LEDs will remain on as long as the radios are left in the charger.
Using the Radio
In order to get the most out of your new radio, read this reference guide completely before attempting to operate the unit.
Turning the Radio On and Adjusting the Volume
1.Press and hold the MENU/
key to turn the radio ON, and increase the volume by pressing the 
key. To decrease the volume, press the 
key.
2.Press and hold the MENU/
key again to turn the radio OFF.
