visible to ensure full phone functionality while charging.

personal computer to charge a weak or dead phone battery.

Charging from a Computer

You can charge your battery by connecting a cable from your phone’s mini-USB port to a high-power USB port on a personal computer (not a low-power one such as the USB port on your keyboard or bus-powered USB hub). Typically, USB high-power ports are located directly on your computer.

Both your phone and the computer must be turned on, and your computer must have the correct software drivers installed. Cables and software drivers are available in

Motorola Original data kits, sold separately.

Note: When your phone’s battery is dead or has a very low charge, you must use the phone’s charger to recharge the battery. You cannot use a USB-cable connection to a

Turn On Your Phone

1Open your phone.

2 Press and hold the power key for 3 seconds.

The phone may require several seconds to power on.

3If necessary, enter your 4-digit unlock code (the last 4 digits of your phone number) and press OK to unlock the phone.

Getting Started

9

Page 11
Image 11
Motorola V3c manual Turn On Your Phone, Charging from a Computer, Motorola Original data kits, sold separately