Motorola V3M manual Installing the Battery, Charging the Battery, To charge the battery

Installing the Battery

Your phone is designed to use only Motorola Original batteries and accessories.

1. Press in the battery door, release latch and remove the battery door.

2. Follow arrows to insert battery.

3. Replace the battery door.

4. Close the battery door.

Charging the Battery

New batteries are shipped partially charged. Before you can use your phone, install and charge the battery as described below. Some batteries perform best after several full charge/discharge cycles.

To charge the battery:

1. Insert the charger into the USB connector on your phone as shown.

2.Plug the other end of the charger into the appropriate electrical outlet.

3.When your phone indicates Charge Complete, remove the charger.

Tip: You can safely leave the charger connected to your phone after charging is complete. This will not damage the battery.

Note: When you charge the battery, the battery level indicator in the upper right corner of the display shows how much of the charging process is complete. At least 1 segment of the battery level indicator must be visible to ensure full phone functionality while charging.

PAGE 6 INSTALLING THE BATTERY GETTING STARTED