Motorola V60i manual Sending a Data Call, Device, 135

Sending a Data Call

Use this procedure to send data from a connected device, and to synchronize phonebook and datebook information between your phone, computer, and/or hand-held device.

Connect your phone to the device as described on page 132 and do the following:

Do This		To
1	Check the phone	make sure that the phone is
		connected and powered on
2	Open the	place the call through the
	application on	application (such as
	your computer	dial-up-networking)
		Note: You cannot dial data
		numbers through your
		phone’s keypad. You must
		dial them through your
		computer.
3	End the call from	close the call and connection
	the connected	when the transfer is complete
	device

Data Calls

135