System Mode Settings
Standard Mode: | Standard | |
Your phone first seeks a home type | ||
Scan | ||
system, then a | ||
| ||
|
| |
Home Only Mode: | Home | |
Phone will not operate outside its | ||
Only | ||
home system. | ||
| ||
|
| |
Scan A Mode*: | Scan A | |
Phone will operate only within | ||
| ||
| ||
|
| |
Scan B Mode*: | Scan B | |
Phone will operate only within | ||
| ||
wireline (B) systems. |
| |
|
| |
Analog Only Mode*: | Analog | |
Phone will only operate on analog | ||
Only | ||
networks. Some peripheral devices | ||
| ||
require analog signals. |
| |
|
|
Analog Only*
Turning Analog Only ON tells your phone to seek an analog
channel for the next call. If you do not place a call, your phone will revert to service after a few minutes.
Note: Some peripheral devices, like fax machines and modems, require analog operation.
4. Find | Press q or Z to scroll to Analog Only. |
Feature |
|
5.Toggle Press A to toggle the feature ON or OFF.
Feature
6. Exit | Press ¼ to exit the menu, or you may scroll |
Menu | to other features. |
* Network and service dependent feature. Not available in all areas.
Analog
Only Off
Shortcut:*
Press Ä then
Ûany time to seek an analog network for one call.