51
Using Memory
Placing a Calling Card Call
Once you have stored your calling card information, recall the
information and place the call whenever you want to use your
calling card. Before your phone begins dialing, it will prompt
you for the number you want to call. Once you have entered the
number, your phone will automatically insert the number in
place of the Number Character you stored.
1. Recall
Entry
Press ‰ then enter the location number
where your calling card sequence is stored.
2. Enter
Number
Press æ. You will see: Enter Number. Enter
the phone number you are calling. You may
enter the number manually or recall it by
location.
3. Place
Call
Press and hold aa
aa to place the call. Your
phone will dial the number to access your
calling card service provider, then wait for
your input when it reaches the first pause.
4. Send
More
Numbers
Press aa
aa or press æ to send the next group
of numbers when the recording prompts you.
The phone will automatically insert the num-
ber to call at the appropriate spot in the
sequence. Press aa
aa to send each set of num-
bers until finished.
5. End
Call
Press º, close the phone, or press and hold
aa
aa until you hear a high tone, and press aaaa
again to end the call.