Using Pause Dialing

Once stored, you may recall the entry and place the call. All of the digits you have stored will be recalled, but your phone will only send the tones for the set of numbers before the first pause.

1.Place Enter the two-digit memory location of the

Call

Pause Dialing number and press and hold a

 

or press ¾. Your phone will dial the access

 

number and wait for your input when it

 

reaches the first pause.

2.Send When the automated system prompts you

More for information, press a or ¾ to send the Numbers next group of numbers. Repeat this step to send each group of numbers that you have

stored.

3. End

Press ¼, close the phone, or press &

Call

hold a until you hear a high tone and

 

press a again.

Using Memory Linking

Each memory location holds up to 32 digits, including pauses. Some automated systems, however, may require you to enter more than 32 digits. If this is required, split the numbers into two memory locations and recall the second set of digits as you need them.

1.Recall 2nd Once you have sent the tones from the Location 1st location, press ä and the two-digit

memory location where you stored the second set of digits.

2.Send Press ä and ¾ to send the tones in the

Tones 2nd location. If you have stored a pause in the 2nd location, your phone will pause as usual when it reaches the pause character.

Using Memory

49

Page 49
Image 49
Motorola V8160 specifications Using Pause Dialing, Using Memory Linking