Connecting a Computer to Display the Configuration Pages
For a Network Installation With Calls Not Prioritized only, you need to connect a computer with DHCP enabled to the Motorola voice terminal to display the configuration pages. For information about enabling DHCP, refer to your operating system documentation.
If you performed an Installation With A Single Computer or a Network Installation With Calls Prioritized, a computer is already connected to the Motorola voice terminal.
To connect a computer to the back of the Motorola voice terminal:
1Connect one end of an Ethernet cable to the PC connector on the Motorola voice terminal.
2Connect the other end of the Ethernet cable to the Ethernet connector on a computer.
3Power up the computer.
18
