VT1000 Series Voice Terminal User Guide
Basic Configuration
To perform basic configuration:
1On a computer connected to the voice terminal PC port or a router, start a Web browser such as Microsoft® Internet Explorer or Netscape Navigator®.
2In the Address or Location field, type http://192.168.102.1 and press ENTER to display the Status page, which displays the Motorola voice terminal settings.
3Click Basic Configuration to display the Basic Configuration window. Its fields are:
Obtain IP | This setting is enabled by default. If either of the following is true, no | |
Address | configuration on this page is required: | |
Dynamically | • | If you have a cable modem with no router and your cable provider |
|
| assigns IP addresses dynamically, the Motorola voice terminal |
|
| obtains its IP address dynamically from your cable provider. |
| • | If you have a router with DHCP enabled, the Motorola voice |
|
| terminal obtains its IP address dynamically from your router. |
Specify Static | If your broadband provider requires a static IP address, enable | |
IP Address | Specify Static IP Address. Type the Static IP Address and IP | |
| addresses for the Subnet Mask, Default Gateway they provide. | |
Enable PPPoE | If you have a DSL modem and no router, enable PPPoE and type the | |
| Service Name, User Name, and Password provided by your | |
| DSL provider. | |
19
