Motorola W766 manual Turn it on & off, To charge using the charger, To charge from your computer

To charge using the charger:

1 Insert the charger into the micro USB connector on your phone as shown.

2 Plug the other end of the

charger into the appropriate electrical outlet.

3When your phone displays Charge Complete, remove the charger.

Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging.

When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one segment of the indicator must be visible to ensure full phone functionality while charging.

To charge from your computer:

You can also charge your phone’s battery by connecting a cable from your phone’s micro USB port

to a high-power USB connector on a computer (not a low-power one, such as the USB connector on your keyboard or bus-powered USB hub). Typically, USB high-power connectors are located directly on your computer.

Both your phone and your computer must be turned on, and you must have correct software drivers installed on your computer. Cables and software drivers are available in Motorola OriginalTM data kits, sold separately.

turn it on & off
Press and hold the Power/End
Key ( / ) until the display turns on.	M
	/

The phone may require several seconds to turn on. If prompted, use the keypad to enter your four-digit unlock code (which, by default, is the last four digits of your phone number) and press the MKey (OK) to unlock the phone.

10essentials