Identifying Status Indicators
12
Identifying Status Indicators
Your radio indicates its operational status through the following: LED Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12 Audio Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13 Indicator Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
LED Indicator
The LED indicator shows the | LED Indicator |
operational status of your radio. |
|
Blinking red – Radio is transmitting at low battery condition, receiving an emergency transmission or has failed the
Solid green – Radio is powering up, or transmitting. Also indicates full charge of the battery when Battery Strength button is pressed.
Blinking green – Radio is receiving a
Double blinking green – Radio is receiving a
call or data 
.
Solid yellow – Radio is monitoring a conventional channel. Also indicates fair battery charge when Battery Strength button is pressed.
Blinking yellow – Radio is scanning for activity or receiving a Call Alert, or all local Linked Capacity Plus channels are busy.
Double blinking yellow – Radio is no longer connected to the repeater while in Capacity Plus or Linked Capacity Plus, all Capacity Plus channels or Linked Capacity Plus channels are currently busy, Auto Roaming is enabled, radio is actively searching for a new site. Also indicates radio has yet to respond to a group call alert, or radio is locked.
NOTE: While in conventional mode, when the LED blinks green, it indicates the radio detects activity over the air. Due to the nature of the digital protocol, this activity may or may not affect the radio's programmed channel.
For Capacity Plus and Linked Capacity Plus, there is no LED indication when the radio is detecting activity over the air.
English
