Finding and Connecting to a Bluetooth Device

Procedure:

1Turn on your Bluetooth-enabled device and place it in pairing mode. Refer to respective Bluetooth-enabled device’s user manual.

1On your radio, press the programmed Bluetooth Connect button.

2A tone sounds and LED blinks yellow.

3Your Bluetooth-enabled device may require additional steps to complete the pairing. Refer to respective Bluetooth- enabled device’s user manual.

4If successful, a positive tone sounds.

OR

If unsuccessful, a negative indicator tone sounds.

Do not turn off your Bluetooth-enabled device during the finding and connecting operation as this cancels the operation.

Your radio connects to the Bluetooth-enabled device within range with either the strongest signal strength, or to one which it has connected to before in a prior session.

NOTE: A pin code may be required to be programmed in your radio before it can pair with some devices. Contact your dealer for more information.

Disconnecting from a Bluetooth Device

Procedure:

Advanced

 Switching Audio Route

1

Press the programmed Bluetooth Disconnect button.

 

2

A positive indicator tone sounds when disconnected.

 

1

Press the programmed Bluetooth Audio Switch button.

Features

You can toggle audio routing between internal radio speaker

 

and external Bluetooth-enabled accessory.

 

Procedure:

 

2

 

 

A tone sounds when the audio route has switched.

 

35

English

Page 45
Image 45
Motorola XPR 7350 manual  Finding and Connecting to a Bluetooth Device,  Disconnecting from a Bluetooth Device