Advanced Features

30

Reinitiating an Emergency Mode

NOTE: This feature is only applicable to the radio sending the Emergency Alarm.

There are two instances where this can happen:

You change the channel while the radio is in Emergency mode. This exits the Emergency mode. If Emergency Alarm is enabled on this new channel, the radio reinitiates Emergency.

You press the programmed Emergency On button during an Emergency initiation/transmission state. This causes the radio to exit this state, and to reinitiate Emergency.

Exiting an Emergency Mode

NOTE: This feature is only applicable to the radio sending the Emergency Alarm.

Your radio exits Emergency mode when one of the following occurs:

Emergency Alarm acknowledgement is received (for Emergency Alarm only), OR

An Emergency Exit Telegram is received, OR

All retries to send the alarm have been exhausted, OR

The Emergency Off button is pressed.

NOTE: If your radio is powered off, it exits the Emergency mode. The radio does not reinitiate the Emergency mode automatically when it is turned on again.

Text Messaging Features

Sending a Quick Text Message

You can send Quick Text messages, programmed by your dealer, via the programmable button.

Procedure:

1Press the programmed One Touch Access button to send a predefined Quick Text message to a predefined ID.

2The LED lights up solid green.

3Two chirps indicate that the message is sent successfully.

OR

A low-pitched tone indicates that the message cannot be sent.

English

Page 40
Image 40
Motorola XPR 7350 manual Text Messaging Features,  Reinitiating an Emergency Mode,  Exiting an Emergency Mode