![](/images/new-backgrounds/1197437/19743721x1.webp)
Turning Your Radio On or Off
Turn P clockwise for On or counterclockwise for Off.
The radio chirps and the display briefly shows all features and display segments of your XTN Series radio.
Then the radio displays the current channel (larger number in the center) and the frequency assigned to that channel (on right).
The interference eliminator code displays briefly. Then the current channel remains displayed.
The transmit light on the front left of the radio flashes every three seconds when the radio is on.
Adjusting the Volume
You can set the volume by turning P.
Note: Do not hold the radio too close to your ear when adjusting the volume or if it is at a high setting.
Using the Radio
k 188
218
Frequency
Code
Started
1.Press and hold Q to check for channel activity. If you hear static, the channel is clear to use. Do not transmit if someone is speaking on the channel. Press Q again to stop monitoring the channel.
2.Press and hold Mand speak into the microphone. To maximize clarity, hold the radio
Note: The transmit light on the front left of the radio lights red when transmitting. 3. Release M and listen for messages.
Getting
X
19
| Basic Operation | |
|
| Indicator Light |
|
| Use B to: |
| Transmit call tone | |
|
| Use M to: |
|
| Talk |
Started |
| Exit a menu |
| Use \to: | |
|
| |
|
| Lock the keypad |
Getting | Scroll through available menus | |
|
| |
| Use T / S to: | |
|
| |
|
| *Access presets |
X |
| Microphone |
|
|
Use P to:
Turn power on/off Adjust radio volume
Use Accessory Jack for:
Radio
Use J to:
Monitor the frequency Turn scan on/off*
Use [ and ] to:
Change channels* Change menu settings
Speaker
20
* XU2600 and XV2600 only