Manuals / Moxa Technologies / Computer Equipment / Network Card

Moxa Technologies 6110 user manual 4-13, Modbus Serial Settings

Models: 6110

1 52

Download 52 pages 37.65 Kb

Page 39

Modbus Serial Settings

Modbus Serial Settings

	Setting	Value	Notes
		RS-232	NPort 6110 supports
	Interface Mode
		RS-422
		RS-422	2-wire RS-485 mode.
			2-wire RS-485 mode.
		RS-485

	Baud Rate	1200 bps to 230400 bps
	Parity	None, Odd, Even,
	Parity	Space, Mark
		Space, Mark
	Data Bits	7, 8
	Stop Bit	1, 2
	Flow Control	None, Xon/Xoff,
	Flow Control	RTS/CTS
		RTS/CTS
	UART FIFO	Enable, Disable

4-13

Image 39

Moxa Technologies 6110 user manual 4-13, Modbus Serial Settings

Contents

Tel +886-2-8919-1230 Fax +886-2-8919-1231 Second Edition, NovemberNPort 6110 Modbus/TCP to Serial Communication Gateway User’s ManualPage Disclaimer NPort 6110 Modbus/TCP to Serial Communication GatewayCopyright Notice TrademarksPage MOXA Internet Services support@moxa.com.twsupport@moxa.com Page 2. Getting Started Table of Contents4. Configuring Modbus Gateway 1. IntroductionTroubleshooting 4-154-17 Upgrade FirmwareIntroduction OverviewSeamless integration of Ethernet and serial Modbus devices Features Powerful operation modes for versatile Modbus applicationsWindows utility for easy setup and traffic monitoring Mechanical Specifications Product SpecificationsSoftware Features Power RequirementsPackage Checklist EnvironmentalRegulatory Approvals 100.4 Front/Top/Rear/Bottom Panel Views0.24 0.16Page Power Connection Serial InstallationGetting Started Software Installation Ethernet Installation2. You will be greeted by the Welcome window. Click on Next to continue Page 6. Click on Next to start copying the software files Page Housing NOTE The DIN-Rail mounting kit is an optional accessoryDIN-Rail STEP 2 Insert the two screw heads Wall Mount6.5 mm 7.8 cmTypical Modbus Applications Serial master device talks to serial slave devices over the InternetLet traditional Modbus serial devices talk over the Internet… Connect all Modbus devices over the Ethernet network… Ethernet master devices talk to multiple serial slave devicesLink the Serial Master device with Ethernet Slave devices… Serial master devices talk to multiple Ethernet slave devicesPage Network Settings Modbus Settings Advanced Modbus Settings Configuring Modbus GatewayStarting Modbus Gateway Configurator Searching for NPort Broadcast Search Specify by IP Address Modify ConfigurationThe Modbus Gateway Configurator window will open as shown below Starting Modbus Gateway ConfiguratorSearching for NPort Broadcast SearchSpecify by IP Address Modify Configuration Network Settings Alphanumeric Modbus SettingsPage Modbus Settings Advanced Modbus Settings IP address 4-10when Auto Slave Unit ID is “Disabled.” 4-114-12 Modbus Serial SettingsModbus Serial Settings 4-134-14 Password4-15 Upgrade FirmwareOther Functions UnlockWhen the Open window appears, navigate to the folder that contains the NPort 6110 firmware file, and then click on the file name. Make sure the correct filename appears in the File name box, and then click on the Open button to start downloading the firmware 4-16Remote Monitoring and Management Start Log Monitor4-17 4-18 4. HMI polling time and timeout interval issue Troubleshooting2. Modbus Address configuration error 3. Proper character timeout configuration for Modbus/RTUPage RS-232 Pin AssignmentsDB9 Male Pinouts Pin NoPage Declaration of Conformity Page Problem Report Form NPort 6110 Modbus GatewayCustomer name RETURN PROCEDURE