Moxa Technologies 405A SERIES, EDS-408A , Configuration Limits of RSTP/STP

EDS-408A/405A Series User’s Manual Featured Functions
3-34
Max. Age (sec.)
Setting Description Factory Default
Numerical value
input by user
If this device is not the root, and it
has not received a hello message
from the root in an amount of time
equal to Max. Age, then this
device will reconfigure itself as a
root. Once two or more devices on
the network are recognized as a
root, the devices will renegotiate
to set up a new Spanning Tree
topology.
20
Enable STP per Port
Setting Description Factory Default
Enable/Disable Select to enable the port as a node
on the Spanning Tree topology. Disabled
NOTE We suggest not enabling the Spanning Tree Protocol once the port is connected to a device (PLC,
RTU, etc.) as opposed to network equipment. The reason is that it will cause unnecessary
negotiation.
Port Priority
Setting Description Factory Default
Numerical value
selected by user
Increase this port’s priority as a
node on the Spanning Tree
topology by entering a lower
number.
128
Port Cost
Setting Description Factory Default
Numerical value
input by user
Input a higher cost to indicate that
this port is less suitable as a node
for the Spanning Tree topology. 200000
Port Status
This indicates the current Spanning Tree status of this port. The status values are Forwarding for
normal transmission, and Blocking to block transmission.
Configuration Limits of RSTP/STP
The Spanning Tree Algorithm places limits on three of the configuration items previously
described:
[Eq. 1]: 1 sec ≦ Hello Time ≦ 10 sec
[Eq. 2]: 6 sec ≦ Max. Age ≦ 40 sec
[Eq. 3]: 4 sec ≦ Forwarding Delay ≦ 30 sec
These three variables are further restricted by the following two inequalities: