Moxa Technologies EDS-508 LED Indicators, Hardware Overview, Color, State, Description, PWR1

Hardware Overview

LED Indicators

The front panel of MOXA EDS-508 contains several LED indicators. The function of each LED is described in the table below.

LED	Color	State	Description
PWR1	AMBER	On	Power is being supplied to power input P1
		Off	Power is not being supplied to power input P1
PWR2	AMBER	On	Power is being supplied to power input P2
		Off	Power is not being supplied to power input P2
		On	When the user-configuredwarning event is
			enabled, and a user-configured event is triggered
FAULT	RED
			When the user-configuredwarning event is
		Off	enabled, and a user-configured event is not
			triggered or when user-configured warning event
			is disable.
		On	When this EDS-508 becomes the Master of this
			Turbo Ring
	GREEN
MASTER
		Blinking	When this EDS-508 becomes Ring Master of this
			Turbo Ring and the Turbo Ring was broken.
		On	When this EDS-508 enables the coupling
			function to form a back-up path
COUPLER	GREEN
		Off	When this EDS-508 disables the coupling
			function
		On	TP port’s 10 Mbps link is active
10M	GREEN
		Blinking	Data is being transmitted at 10 Mbps
		Off	TP Port’s 10 Mbps link is inactive
100M		On	TP port’s 100 Mbps link is active
	GREEN
		Blinking	Data is being transmitted at 100 Mbps
(TP)
		Off	100BaseTX Port’s link is inactive

MOXA EtherDevice Switch Hardware Installation Guide 4-3