Moxa Technologies NPort 6110 user manual Wall Mount

Wall Mount

For many industrial applications, you will find it convenient to mount NPort 6110 on the wall, using two screws, as indicated below.

STEP 1: Screw two screws, separated by 7.8 cm, into the wall. The heads of the screws should be no greater than 6.5 mm in diameter, and the shafts should be no greater than 3 mm in diameter. Do not screw the screws in all the way—leave a space of about 2 mm to allow room for sliding the NPort 6110 unit’s ears between the wall and the screws.

6.5 mm

		7.8 cm
STEP 2: Insert the two screw heads		STEP 3: For added stability, tighten
through the large parts of the		the two screws.
keyhole shaped apertures, and
then slide NPort 6110
downwards, as indicated.
RESET	10/100M
9-30V	Ethernet
PWR		RESET	10/100M
Link		9-30V	Ethernet
Ready		PWR
		Link
		Ready
	6110
Modbus/TCP to Serial
Communication Gateway
			6110
		Modbus/TCP to Serial
		Communication Gateway
RS-232/422/485
		RS-232/422/485

To remove NPort Express from the wall mount, simply reverse Steps 2 and 3.

2-8