Software Pr ogra ms Chapte r 6
MPC User Manual Rev 0D 55
6.1.1.3 Logging Stats
In the Logging Control window, click on the Logging Stats button to bring you to the Logging
Statistics page. An example is shown in Figure 48.
Figure 48: Logging Statistics
Choose a Channel by clicking on its button. Log summaries are shown line by line. The following
definitions apply:
LogSumL: Specifies the channel number
Log SumF: Specifies the file name and location on the MPC
LogSumI: A log, command or message that has occurred as a result of the
current channel’ s schedule. The log n ame is preceded by the num-
ber of times it has been received and recorded in the file. It is then
followed by a short defi nition.
LogSum: On its own, LogSum gives a count of the Total Binary Logs, the
Total A SCII lo gs or the Tot al Prom pts (or mes sages) t hat ha ve oc-
curred as a result of the current channel’s schedule.
LogSumT: Specifies the total number of logs, command and p rompts based on
the LogSum lines abov e.
Click on the OK button to return you to the main Logging Control window (Figure 45 on Page 50).
6.1.2 Setup Configuration
The Setup Configuration window allows you to configure your internet connection, modify the name
you give to yo ur MPC , check th e receiver conf ig uratio n and recon figur e you r MPC u sing commands,
adjust services, upload data, and upgrade/update the MPC firmware. The Setup C onf iguration
window can be seen in Figure 49.