MPI Technologies 2100 4 PSF/400 AFP Printing Using TCP/IP

4 PSF/400 AFP Printing Using TCP/IP
This chapter provides configuration guidelines for OS/400 using TCP/IP. The
versions differ somewhat in the setup.
For the different OS/400 versions, use the cross-references below:
4.1, AS/400 Settings for Version 3.1
4.2, AS/400 Settings for Version 3.2
4.3, AS/400 Settings for Version 3.6
4.4, AS/400 Settings for Version 3.7
4.5, AS/400 Settings for Version 4.1
4.6, AS/400 Settings for Version 4.2
4.7, AS/400 settings for Version 4.3
Requirements:
Before IPDS printing using TCP/IP can be accomplished, the following points need
to be checked:
• TCP/IP is installed and enabled
• The relevant PTFs are applied
• The WRKAFP2 command is compiled
(for AS/400 3.1 and 3.6 only)
Details on how to verify these items can be found on the internet.
Consult the following IBM web address for details:
http://as400service.rochester.ibm.com/
In the Technical Information database, you find the following links:
• AS/400 Knowledge Base
This link directs you to the area of the Knowledge Base, which is
specifically about Print. IBM Doc. No. 8414724, PTF Listing for AFP Printing
is a good entry.
• Preventive Service Planning (PSP)
This link directs you to the area of the Knowledge Base about Cumulative
PTF Package for all OS/400 versions. IBM Doc. No. 8203740, PTF Listing
for TCP/LAN Printing is a good entry.
10