3 Configuration

3.1 Using the Web Browser

Through a web browser it is possible to configure the IPDS DIMM and to perform various advanced test functions.

3.1.1 Requirements

A web browser, for example Microsoft Internet Explorer 4.0 or Netscape Navigator 4.0 or higher.

A TCP/IP enabled EIO Interface Card with an IP address.

3.1.2Getting Started

1.Start the web browser.

2.After http://, type the IP address of the PrintServer followed by :9100/ipds/ in the web browser’s Address or Location box. The web browser will load the IPDS Menu from the IPDS DIMM.

Note: The loading of the page may take more than a minute.

Figure 1, IPDS Menu

5

Page 5
Image 5
MPI Technologies 2100 manual Configuration, Using the Web Browser, Requirements, Getting Started