A completed screen looks like this:
PSF Configuration Information | NETWRKPRT | Page 1 | AFP |
PSF configuration: | Library: | ||
User resource library . . . . . . . . . . . . . : *JOBLIBL |
| ||
IPDS pass through . . . . . . . . . . . . . . . : *YES |
| ||
Activate release timer. . . . . . . . . . . . . : *NORDYF |
| ||
Release timer . . . . . . . . . . . . . . . . . : *SEC15 |
| ||
Restart timer . . . . . . . . . . . . . . . . . : *IMMED |
| ||
SNA retry count . . . . . . . . . . . . . . . . : 2 |
| ||
Delay time between retries. . . . . . . . . . . : 0 |
| ||
Blank page. . . . . . . . . . . . . . . . . . . : *YES |
| ||
Page size control . . . . . . . . . . . . . . . : *YES |
| ||
Resident fonts. . . . . . . . . . . . . . . . . : *YES |
| ||
Resource retention. . . . . . . . . . . . . . . : *YES |
| ||
Edge orient . . . . . . . . . . . . . . . . . . : *NO |
| ||
Remote location: |
|
|
|
Name or address . . . . . . . . . . . . . . . . : *NONE |
| ||
TCP/IP port . . . . . . . . . . . . . . . . . . : *NONE |
| ||
TCP/IP activation timer . . . . . . . . . . . . : 170 |
| ||
PSF defined options: | *NONE |
|
|
Text description . . . . . . . . . . . . . . . . : IDATA IPDS DIMM
Device resource library list: | *DFT |
Note: The lines in bold in the above screen are not used by PSF/400. Instead, PSF/400 uses the information entered in the device description screen.
Then do the following:
Ping the IP address to verify communication with the printer:
PING ’192.194.134.90’
Vary the printer on:
VRYCFG HP_IPDS CFGTYPE(*DEV) STATUS(*ON)
Start the print writer:
STRPRTWTR HP_IPDS
25
