6 AIX (version 4.2) for PPD

For a description of PSF for AIX, please see the IBM manual, IBM Print Services Facility for AIX: Print Administration version 2.1, Doc. no. S544-3817-02.

6.1Device Parameter Setup

1.From smit, enter the main menu and select PSF for AIX - Printing and

Configuration

2.Here, you continue through the following screens by selecting Administer

PSF for AIX, Manage a PSF for AIX Printer and Show/Change Characteristics of a Printer

3.Now select Device Options and select your device.

4.On the screen TCP/IP-Attached Printer Device Options, type Internet ADDRESS, PORT number (5001 if you use LinkCom or HostCom, otherwise 9100) and the value you want for Connection TIMEOUT in seconds.

5.After changing the values, you must go back to the main screen, select PSF for AIX - Printing and Configuration and then Bring Queues Up and Down to stop and start the queue for the changes to take effect.

29

Page 29
Image 29
MPI Technologies 2100 manual AIX version 4.2 for PPD, Device Parameter Setup, Configuration