GB 2. Mounting the microphone and speakers
2.1The microphone must be positioned in front of the center of the mouth.
2.2Attach the speakers to the Velcro inside your helmet opposite your ears (short speaker cord for left ear & long speaker cord for right ear), or use the supplied Velcro pads.
2.3For some countries’ traffic regulations, only one speaker is permitted to install in the helmet. In this case, the right side speaker can be detached.
Note: Always prioritize safety! Make sure to stay focused on the road during a mobile phone conversation. In bad weather and/or heavy traffic, we recommend pulling over and stopping, before answering the call.
Operation
Power On and Off
1.In power off mode: press CTRL button and hold it for 3 seconds until you hear a “di” tone.
Release the button: the blue indicator will flash to indicate the Blue Biker is switched ON.
2.In power on mode: press CTRL button and hold it for 5 seconds until you hear a long “di” tone. The LED indicators will turn out to indicate the Blue Biker is switched off.
Pairing
Make sure that the Blue Biker is turned off (LED indicator = off). => Make sure that the Bluetooth® function of your mobile phone is turned ON and let your phone search for Bluetooth®devices. => Press and hold the CTRL button of the Blue Biker until the LED indicator starts flashing by blue and red colors alternately. => Your mobile phone, which is still in search mode, will show the Blue Biker in the list of found Bluetooth® devices. => Select the Blue Biker in your mobile phone and enter the PIN code 0000 to pair both devices. You will hear a long beep. =>The blue LED indicator (5) will start flashing and you will hear a “di” tone.
Now you can use the headset to make handsfree calls (A) and enjoy the music (B) stored on your mobile phone.
- -
