MRV Communications, Inc. – Installation Manual
43
Fig. 5.10: Mounting TS5000 on Alignment Device

Mounting

1- Accessories

• Horizontal surfaces (parapet, ...):
THE JMP SHOULD BE ORIENTED IN SUCH A WAY THAT THE GROUNDING
SCREW IS LOCATED ON THE BACK (CLOSE TO THE INSTALLER) AND THE
FRONT IS FACING THE OPPOSITE SITE.

2- Attachment of the Transceiver (TS)

In order to place the Transceiver in the right place on the swing base, direct
and insert three screw heads from the bottom of the box to three bigger holes
on the swing base
Screw 4 screws (M6x30mm x ½” length) with the spring washers to fix the
transceiver on the swing base. These 4 screws should be locked tightly with
the help of appropriate tools.
Figure 5.9: JMP on the fixation surface
TS5000
Head
G: Screws from the
b
ottom of the box
Swing Base
AD-5000
JMP-8