|
|
|
|
5. Position the cooling set onto the re- | 6. Then press down the other end of the |
tention mechanism. | clip to fasten the cooling set on the |
Hook one end of the clip to hook | top of the retention mechanism. |
first. | Locate the Fix Lever and lift up it. |
7. Fasten down the lever.
8.Attach the CPU Fan cable to the CPU fan connector on the mainboard.
Important
•Mainboard photos shown in this section are for demonstration only. The appearance of your mainboard may vary depending on the model you purchase.
•While disconnecting the Safety Hook from the fixed bolt, it is necessary to keep an eye on your fingers, because once the Safety Hook is disconnected from the fixed bolt, the fixed lever will spring back instantly.
