![](/images/new-backgrounds/1319068/31906891x1.webp)
▶SATA1~6 & 7/8 & 9/10 & IDE Primary Master/ Slave &
-SATA1/2
▶Device / Vendor / Size
It will show the device information that you connected to the SATA connector. ▶LBA/Large Mode
This allows you to enable or disable the LBA Mode. Setting to Auto enables LBA mode if the device supports it and the devices is not already formatted with LBA mode disabled.
▶DMA Mode Select DMA Mode.
▶Hard Disk S.M.A.R.T.
This allows you to activate the S.M.A.R.T.
Important
IDE Primary Master/ Slave, SATA 1~5 &
▶Floppy Drive A
This item allows you to set the type of floppy drives installed.