Specifications, Jpeg, Xxx | Sanyo DSR-3506P specification

2SPECIFICATIONS

Specifications

	Product name			Digital video recorder with multiplexer function

	Product number			DSR-3506P

	Hard disk capacity			80 GB [Capability for expansion using 80, 160, 250, or 300 GB hard disks (sold separately)]

	Television system			PAL signal standard

	Image compression			M-JPEG

	Picture resolution			720 x 288 (fields)

	Recording type			Field recording

	Picture quality			5 levels [Basic, Normal, Enhanced, Fine, Super Fine]

	Recording rate			27 levels (60.00 to 0.03 FPS)

	Recording areas			Normal recording area, Alarm recording area, Archive area

	Magnification			x2 digital zoom using the [ZOOM] button

	Search modes			Time/date search, Alarm search, Alarm thumbnail search, Archive area search, Motion
	Search modes			detection search
				detection search

	Date/clock settings			Day, Month, Year (last two digits), Hours, Minutes, Seconds

	Date and time positions			2 position; upper and lower (display may also be turned off)

	Camera title display			Each channel; up to 10 alphanumeric characters and symbols (display may also be turned
	Camera title display			off)
				off)

	Memory backup			Approximately 30 days (for 48 hours of electrification)

	Video input terminal			VBS/VS, 1.0 V (p-p), 75 Ω, BNC (x6)

	Video output terminal			Through output of each video input, BNC (x6)

	Main monitor output terminal			VBS 1.0V (p-p), 75 Ω, BNC (x1)

	Monitor 2 output terminal			VBS/VS 1.0V (p-p), 75 Ω, BNC (x1)

	Audio input terminal			-8 dBs, 27 kΩ, unbalanced RCA (x1)

	Audio output terminal			-8 dBs, 600 Ω, unbalanced RCA (x1)

	Microphone input terminal			-60 dBs, 10 kΩ, unbalanced 3.5 mm pin jack (x1)

	CompactFlash card slot			CompactFlash Type 2 (front panel) (x1)

			LAN terminal	10BASE-T/100BASE-TX, RJ-45 (x1)

			RS-485 terminal	RJ-11 (x2)

			Remote control input terminal	Two-wire voltage control (x2)

			Alarm input terminals	No-volt contacts (with a pulse width of 100 ms or more) (x6)

			Alarm output terminal	Active Low, Open collector Max. 500 mA (x1)

			Sensor alarm output terminals	Open collector, Low level active (Max. 25 mA) (x6)

			Alarm reset input terminal	No-volt contacts (with a pulse width of 100 ms or more) (x1)

	Terminals		Non rec output terminal	Normal 5V DC, Low level active (x1)
	Terminals
			Clock adjust input terminal	No-volt contacts (with a pulse width of 100 ms or more) (x1)

			Clock adjust output terminal	Normal 5V DC, Low level active (x1)

			Warning output terminal	Normal 5V DC, Low level active (x1)

			Normal recording area disk	Normal 5V DC, Low level active (x1)
			full warning output terminal	Normal 5V DC, Low level active (x1)
			full warning output terminal

			Alarm recording area disk full	Normal 5V DC, Low level active (x1)
			warning output terminal	Normal 5V DC, Low level active (x1)
			warning output terminal

			External timer input terminal	No-volt contacts (with a pulse width of 1 second or more) (x1)

	Power supply voltage			120 to 240V AC, 50/60 Hz

	Power consumption			XXX

	Allowable operating temperature			5° to 40°

	Allowable operating humidity			10% to 80%

	Dimensions			420 (W) x 96 (H) x 364.5 (D) mm

	Weight			6.2 kg with a HDD, 6.8 kg with 2 HDDs

	Accessory			Power cord (x1), Core clamp (x1), Power cord tie (x1)

Note that product appearance and specifications are subject to change without prior notice.

English

101

Image 102

Sanyo DSR-3506P manual Specifications, Jpeg, Xxx

Contents

Page Location PrecautionService Avoiding Electrical Shock and Fire Symbols used in this manual Main featuresAccessories Introduction Contents Contents Settings Other Before USE „ Notes on replacing the HDD„ Handling a detached HDD unit Hard disk and cooling fan are consumable components Backup batteryBefore USE Important recordings Names and Functions of Parts Front panel Names and Functions of Parts Rear panel Connecting Alarm in terminals Installation and ConnectionsConnecting an amplifier Basic connections Connecting control terminals Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting the power cord 01-01-04 000000 REC Reperat EN a Alarm Preparing for USEOperation display area Changing the language Preparing for USEChanging the position of the operation display area Press the OSD button several times Turn the shuttle dial clockwise Setting the timeExample Setting 830 on 22 May Press the Exit button Hard disk recording areas Alarm recording areaPreparing for USE The internal hard disk Normal recording area Viewing on multiple screens Viewing Video from a CameraViewing on a full screen Press the No Camera Select button Press the Multi button Viewing Video from a CameraViewing with automatic screen selection Press the Sequence button Set MON.2 Display from Alarm Operation SET to ON. JP.74 Viewing on the monitorPress the MON2 button Recording Timer recordingPress the Timer button Normal recording End alarm recording Alarm recordingSet alarm recording When an alarm signal is detected After entering the setting, press the Exit button Pre-alarm recordingSet pre-alarm recording If an alarm is detected Fast-forward and fast-rewind playback PlaybackPlaying video on a full screen Changing the playback speed Press the Zoom button during playback PlaybackEnlarging the playback video Move the zoom frame to the area to be magnified Press the Zoom button Viewing still imagesPerforming frame advance forward or reverse Press the Still button during playback Playing video on multiple screens Press the Quad button during playbackPress the Multi button during playback Searching for Recorded Video „ To view pre-alarm video Alarm searchPress the appropriate Alarm button during playback To view alarm video before or after the current playback Time/date search Alarm thumbnail searchAlarm number for the selected recording will start to flash Turn the jog dial to select TIME/DATE Search Channel Recording TOPRecording END Search Motion detection search Search indicator lights and Search screen is displayedArchive area search Turn the jog dial to select the video for playback END Example Normal Cursor moves to ChannelStart Motion Sensor OFF flashes Motion sensor setting screen is displayedSet the motion sensor to use for searching ‹OFF Carry out motion sensor setting again „ If not FOUND! is displayedDisplay returns to the Motion Detection Search screen Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.35Copying video to a CompactFlash card or Microdrive JP.36 Press the Copy button Saving Copying Recorded VideoCopying video to the hard disk’s archive area Example Copying a specified 10-second portion of video Insert a CompactFlash card „ To cancel a copy operationTurn the jog dial to select Seconds Insertion method Removal method Copy screen is displayed Archive Area flashes Jpeg images Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Images copied to a CompactFlash card Basic menu operations Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Turn the jog dial to select a menu Menu Configuration and Operations Restoring menu setting items to their default valuesMovement and confirmation in sub-menus and setting screens Sub-menu configuration Main menu Turn the jog dial to select the item toBe set, and then turn the shuttle dial Clockwise Sequence SET Sub menu Setting item Settings or display contentMulti Screen JP.87 Color Level JP.93 Initial SET is used to make the following setting Initial settingsSetting the summer time Initial SET Turn the jog dial to change the settings When USE is selected for Summer Time SETInitial SET Cursor moves to the time External clock settingCursor moves to the month To C Terminal To Clock SET in terminal Detecting connected cameras Example First position for title setting flashes Setting camera titlesExample Setting the title HALL-1F for Camera No Turn the jog dial to select H Setting holidays Example Setting 17 November as a holiday Month Turn the shuttle dial clockwise after settingSet the day and month for item No Day Setting time periods Time Period a settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period B settings Set T1 to 6 AM Time period operations settings Time Period a flashesCursor moves to Mask Record SET is used to make the following settings Settings for recordingPerforming easy setup Record SET Cursor moves to Timer Recording DAY Setting based on recording daysEasy Setup screen is displayed Record SET Set Picture Quality Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Audio Recording Setting based on recording rate See P.55 AlarmDisplaying the recording areas Recording Area SET screen is displayed „ Recording area allocations „ Default hard disk settingsChanging recording areas „ If the normal recording area is set to 0% Setting overwrite permission Setting recording conditions No on the Warning screen flashes FlashingOn flashes Setting auto deleting Turn the jog dial to select the storage period01-01-04 000000 REC 1% Setting normal recording Turn the shuttle dial clockwise Press the Exit buttonClockwise Set REC Program Group Setting program recordingSet REC Rate Program Cursor moves to 01 from Serect Individual Camera Rate FPS Recording rate flashesVideo from Camera No will not be recorded Timer settings Timer setting itemsStart To cancel all set timer reservations „ To change a displayed setting item„ Picture quality and recording rate for timer recording Timer reservations spanning more than 24 hours OFF for Program flashes Make settings in the Week and Start columnsTimer recording using an external timer For FPS flashes Dial clockwise Setting alarm recordingTo set alarm recording OFF flashes Set REC Rate and Duration Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Recording pattern for SW and only REC Rate for PRE-ALARM Recording flashes When alarm recording settings have been completedTo set pre-alarm recording Cursor moves to recording rate and duration Default setting 1 MIN Cursor moves to Alarm Trigger When pre-alarm recording settings have been completedSetting the alarm trigger Use this setting to indicate how alarms are to be detected Press the Camera Select button Setting the motion sensorsUse this procedure to set other sensor positions Level OFF flashes for Level Flashes for the ModeCursor moves to Level To B Example Alarm Setting alarm operation and displayOFF flashes in the Alarm Retrigger field „ To stop motion sensor recording Canceling alarms Setting alarm displayCursor moves to Alarm Priority 01-01-04 000000 REC 1% EN a Alarm General settingsSetting data display General SET Setting display for video loss General SETPerform the following if so required Disk Full default setting on Setting the buzzerAlarm default setting OFF Disk Error default setting on „ Operation after setting passwords Setting the security lockUse the same procedure to set 123456AB Setting the administrator password Turn the jog dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Then turn the shuttle dial clockwise Canceling the security lock Setting and initializing the hard diskSetting the security lock Initializing the hard disk Network settings Expanding the hard disk capacityMaking network connections Network SET screen is displayed Making network settingsConnecting to an intranet using a hub OFF flashes for Network Control Set Gateway Set IP AddressSet Subnet Mask Set Port General SET screen appears Setting RS-485Enter the password using the shuttle dial and jog dial Cursor moves to Status Info ‹DATA Setting procedure is ended and the display returns toNormal screen Speed Screen SET Setting quad and multi 6 displaySetting quad positions Example Displaying Camera No in quad position Checking modified screen positions Setting multi 6 positionsScreen SET Changes to Example Automatic switching of a full screen every 5 seconds 1S flashes for Full Setting the main monitor and monitor Specify Time Period a and Time Period BMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Mask SET screen is displayed Setting masksCursor moves to Mask SET Starts to flash for Time Period Setting the color level OFF flashes Settings ‹ indicates the default settingColor Level SET screen is displayed Auto flashes ‹AUTO Power Power FAILURE/USED TimeFAILURE/RECOVER DISK1 USE Initialized Record AreaOperation class Save Menus to CF Copy Menu SettingsSaving menu settings on a CompactFlash card Load Menus from CF When copying recording area settings Copy Menu SettingsLoading settings from a CompactFlash card Turn the jog dial to select Load Interface Specifications RS-485 specificationsRS-485 termination switch settings Interface Specifications DVR/VCR command table Jpeg SpecificationsSpecifications XXX Specifications DimensionsUnits mm 364.5 420 349 Table of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage„ Example After expansion to 160 GB 100%-usage 104 „ Example After expansion to 300 GB 100%-usage Table of recording rate settings Program recording rate Table of pre-alarm recording times Minutes 10s 20s 40sFPS field/sec Menu Setting Sequence Normal REC Mode SET →P.62Title SET →P.47 Menu Setting Sequence HDD SET →P.81 Mask SET →P.92RS-485 SET →P.85 Index Time/date search Timer recording Timer settings Index