Sanyo DSR-3506P Following this, turn the shuttle dial clockwise, Turn the jog dial to select on

4GENERAL SET

zTo set a 4-digit password

Turn the shuttle dial clockwise when “-” for the fifth character is flashing.

7 Following this, turn the shuttle dial clockwise.

The cursor moves to “OFF” (flashing).

8 Turn the jog dial to select “ON”.

zIf you select “OFF” for the “ADMIN” setting, you cannot set the “USER” password.

9 Turn the shuttle dial clockwise.

The cursor moves to “USER”.

If you do not want to set a user password, the password setting procedure can now be ended. Turn the jog dial to move the cursor to “REC CONTROL” so that authorization for recording and playback operations may be set.

Setting the user password

Example: Setting “AB123456”

1 Turn the jog dial to move the cursor to “USER”.

2 Turn the shuttle dial clockwise.

The first password entry bar “-” flashes.

Turn the jog dial to display “A”.

USER A------- OFF

3 Turn the jog dial clockwise.

The second password entry bar “-” flashes.

Turn the jog dial to display “B”.

Use the same procedure as for the administrator password to set “123456”.

4 Following this, turn the shuttle dial clockwise.

The cursor moves to “OFF” (flashing).

5	then turn the shuttle dial clockwise.	SETTINGS
	Turn the jog dial to select “ON”, and

The cursor moves to “REC CONTROL”.

Setting operation priority for recording and playback

1 Turn the jog dial to move cursor to “REC CONTROL”.

2 Turn the shuttle dial clockwise.

Turn the jog dial to select either “ADMIN” or “USER”, and then turn the shuttle dial clockwise.

This completes the setting procedure.

80 English