Setting masks, Cursor moves to Mask SET | Sanyo DSR-3506P specs

5SCREEN SET

Setting masks

Use the following procedure to set video from a specific camera (including playback video) to be masked by a gray pattern when it is not to be shown on a monitor screen.

01

04

Example:

Preventing the display of unneeded camera video at the set period (as indicated by TIME PERIOD A and

TIME PERIOD B).

1 Make timer settings for “TIME PERIOD A” and “TIME PERIOD B” from <TIME PERIOD SET>. (JP.50)

Specify “TIME PERIOD A” and “TIME PERIOD B”.

2 Press the [MENU] button, turn the jog dial to select “4. SCREEN SET”, and then turn the shuttle dial clockwise.

The <SCREEN SET> screen is displayed.The cursor moves to “1. MULTI SCREEN”.

MENU

3 Turn the jog dial to move the cursor to “MASK”, and then turn the shuttle dial clockwise.

“OFF” flashes.

4 Turn the jog dial to select “ON”, and then turn the shuttle dial clockwise.

The cursor moves to “MASK SET”.

5 Turn the shuttle dial clockwise.

The <MASK SET> screen is displayed.

SETTINGS

6 Turn the shuttle dial clockwise.

“T-1” starts to flash for “TIME PERIOD”.

7 Turn the jog dial to select T-1, T-2, T-3, or T-4 for the time period, and then turn the shuttle dial clockwise.

After setting the period, the cursor moves to channel 1 for the “MAIN”.

zEach camera can be set individually for the main monitor, the monitor 2, and network video.

92

English

Image 93

Sanyo DSR-3506P Setting masks, Cursor moves to Mask SET, Mask SET screen is displayed, Starts to flash for Time Period

Contents

Page Service PrecautionLocation Avoiding Electrical Shock and Fire Accessories Main featuresSymbols used in this manual Introduction Contents Other Contents Settings Before USE „ Notes on replacing the HDD„ Handling a detached HDD unit Before USE Backup batteryHard disk and cooling fan are consumable components Important recordings Front panel Names and Functions of Parts Names and Functions of Parts Rear panel Connecting an amplifier Installation and ConnectionsConnecting Alarm in terminals Basic connections Connecting Sensor Alarm OUT terminals Installation and ConnectionsConnecting control terminals Connecting the power cord 01-01-04 000000 REC Reperat EN a Alarm Preparing for USEOperation display area Changing the position of the operation display area Preparing for USEChanging the language Press the OSD button several times Example Setting 830 on 22 May Setting the timeTurn the shuttle dial clockwise Press the Exit button Preparing for USE The internal hard disk Alarm recording areaHard disk recording areas Normal recording area Viewing on a full screen Viewing Video from a CameraViewing on multiple screens Press the No Camera Select button Viewing with automatic screen selection Viewing Video from a CameraPress the Multi button Press the Sequence button Set MON.2 Display from Alarm Operation SET to ON. JP.74 Viewing on the monitorPress the MON2 button Press the Timer button Timer recordingRecording Normal recording Set alarm recording Alarm recordingEnd alarm recording When an alarm signal is detected Set pre-alarm recording Pre-alarm recordingAfter entering the setting, press the Exit button If an alarm is detected Playing video on a full screen PlaybackFast-forward and fast-rewind playback Changing the playback speed Enlarging the playback video PlaybackPress the Zoom button during playback Move the zoom frame to the area to be magnified Performing frame advance forward or reverse Viewing still imagesPress the Zoom button Press the Still button during playback Playing video on multiple screens Press the Quad button during playbackPress the Multi button during playback Searching for Recorded Video Press the appropriate Alarm button during playback Alarm search„ To view pre-alarm video To view alarm video before or after the current playback Alarm number for the selected recording will start to flash Alarm thumbnail searchTime/date search Turn the jog dial to select TIME/DATE Search Recording END Recording TOPChannel Search Archive area search Search indicator lights and Search screen is displayedMotion detection search Turn the jog dial to select the video for playback Start Example Normal Cursor moves to ChannelEND Motion Sensor Set the motion sensor to use for searching Motion sensor setting screen is displayedOFF flashes ‹OFF Carry out motion sensor setting again „ If not FOUND! is displayedDisplay returns to the Motion Detection Search screen Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.35Copying video to a CompactFlash card or Microdrive JP.36 Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Example Copying a specified 10-second portion of video Turn the jog dial to select Seconds „ To cancel a copy operationInsert a CompactFlash card Insertion method Removal method Archive Area flashes Copy screen is displayed Formatting a CompactFlash card Viewing images copied to a CompactFlash card on a PCJpeg images Images copied to a CompactFlash card Moving from the Main Menu to a sub-menu or setting screen Menu Configuration and OperationsBasic menu operations Turn the jog dial to select a menu Menu Configuration and Operations Restoring menu setting items to their default valuesMovement and confirmation in sub-menus and setting screens Sub-menu configuration Main menu Turn the jog dial to select the item toBe set, and then turn the shuttle dial Clockwise Multi Screen JP.87 Sub menu Setting item Settings or display contentSequence SET Color Level JP.93 Setting the summer time Initial settingsInitial SET is used to make the following setting Initial SET Turn the jog dial to change the settings When USE is selected for Summer Time SETInitial SET Cursor moves to the month External clock settingCursor moves to the time To C Terminal To Clock SET in terminal Example Detecting connected cameras Example Setting the title HALL-1F for Camera No Setting camera titlesFirst position for title setting flashes Turn the jog dial to select H Example Setting 17 November as a holiday Setting holidays Set the day and month for item No Turn the shuttle dial clockwise after settingMonth Day Setting time periods Example 1 Setting periods using Time Period a Timer period settingsTime Period a settings Set T1 to 6 AM Time Period B settings Set T1 to 6 AM Time period operations settings Time Period a flashesCursor moves to Mask Performing easy setup Settings for recordingRecord SET is used to make the following settings Record SET Easy Setup screen is displayed Setting based on recording daysCursor moves to Timer Recording DAY Record SET Display returns to the Easy Setup screen Example on Settings ‹ indicates the default settingSet Picture Quality Set Audio Recording Setting based on recording rate Displaying the recording areas AlarmSee P.55 Recording Area SET screen is displayed Changing recording areas „ Default hard disk settings„ Recording area allocations „ If the normal recording area is set to 0% Setting overwrite permission Setting recording conditions No on the Warning screen flashes FlashingOn flashes Setting auto deleting Turn the jog dial to select the storage period01-01-04 000000 REC 1% Setting normal recording Turn the shuttle dial clockwise Press the Exit buttonClockwise Set REC Rate Setting program recordingSet REC Program Group Program Cursor moves to 01 from Serect Individual Camera Rate FPS Recording rate flashesVideo from Camera No will not be recorded Timer settings Timer setting itemsStart „ Picture quality and recording rate for timer recording „ To change a displayed setting itemTo cancel all set timer reservations Timer reservations spanning more than 24 hours Timer recording using an external timer Make settings in the Week and Start columnsOFF for Program flashes For FPS flashes To set alarm recording Setting alarm recordingDial clockwise OFF flashes Operates while an alarm is being triggered sec. minimum Maximum number of alarm recordingsSet REC Rate and Duration Recording pattern for SW and only To set pre-alarm recording When alarm recording settings have been completedREC Rate for PRE-ALARM Recording flashes Cursor moves to recording rate and duration Setting the alarm trigger When pre-alarm recording settings have been completedDefault setting 1 MIN Cursor moves to Alarm Trigger Use this setting to indicate how alarms are to be detected Use this procedure to set other sensor positions Setting the motion sensorsPress the Camera Select button Level Cursor moves to Level Flashes for the ModeOFF flashes for Level To B OFF flashes in the Alarm Retrigger field Setting alarm operation and displayExample Alarm „ To stop motion sensor recording Canceling alarms Setting alarm displayCursor moves to Alarm Priority Setting data display General settings01-01-04 000000 REC 1% EN a Alarm General SET Setting display for video loss General SETPerform the following if so required Alarm default setting OFF Setting the buzzerDisk Full default setting on Disk Error default setting on Use the same procedure to set 123456AB Setting the security lock„ Operation after setting passwords Setting the administrator password Turn the jog dial to select on Following this, turn the shuttle dial clockwiseTurn the jog dial clockwise Then turn the shuttle dial clockwise Setting the security lock Setting and initializing the hard diskCanceling the security lock Initializing the hard disk Network settings Expanding the hard disk capacityMaking network connections Connecting to an intranet using a hub Making network settingsNetwork SET screen is displayed OFF flashes for Network Control Set Subnet Mask Set IP AddressSet Gateway Set Port Enter the password using the shuttle dial and jog dial Setting RS-485General SET screen appears Cursor moves to Status Info Normal screen Setting procedure is ended and the display returns to‹DATA Speed Setting quad positions Setting quad and multi 6 displayScreen SET Example Displaying Camera No in quad position Screen SET Setting multi 6 positionsChecking modified screen positions Changes to 1S flashes for Full Example Automatic switching of a full screen every 5 seconds Setting the main monitor and monitor Specify Time Period a and Time Period BMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Cursor moves to Mask SET Setting masksMask SET screen is displayed Starts to flash for Time Period Setting the color level OFF flashes Settings ‹ indicates the default settingColor Level SET screen is displayed ‹AUTO Auto flashes FAILURE/RECOVER Power FAILURE/USED TimePower DISK1 USE Initialized Record AreaOperation class Saving menu settings on a CompactFlash card Copy Menu SettingsSave Menus to CF Load Menus from CF Loading settings from a CompactFlash card Copy Menu SettingsWhen copying recording area settings Turn the jog dial to select Load Interface Specifications RS-485 specificationsRS-485 termination switch settings DVR/VCR command table Interface Specifications Specifications SpecificationsJpeg XXX Specifications DimensionsUnits mm 364.5 420 349 Table of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage„ Example After expansion to 160 GB 100%-usage „ Example After expansion to 300 GB 100%-usage 104 Program recording rate Table of recording rate settings Table of pre-alarm recording times Minutes 10s 20s 40sFPS field/sec Menu Setting Sequence Normal REC Mode SET →P.62Title SET →P.47 Menu Setting Sequence HDD SET →P.81 Mask SET →P.92RS-485 SET →P.85 Index Index Time/date search Timer recording Timer settings