Setting the main monitor and monitor | Sanyo DSR-3506P instruction

5SCREEN SET

4 Press the [EXIT] button.

The setting procedure is ended and the display returns to the normal screen.

EXIT

Setting the main monitor and monitor 2

Example:

Specifying a monitor to display each camera’s video at the set period (as indicated by TIME PERIOD A and

TIME PERIOD B).

1 Make timer settings for “TIME PERIOD A” and “TIME PERIOD B” from <TIME PERIOD SET>. (JP.50)

Specify “TIME PERIOD A” and “TIME PERIOD B”.

2 Press the [MENU] button and turn the jog dial to select “4. SCREEN SET”, and then turn the shuttle dial clockwise.

The <SCREEN SET> screen is displayed. The cursor moves to “1. MULTI SCREEN”.

3 Turn the jog dial to move the cursor to “MAIN/MON.2 MONITOR SET”, and then turn the shuttle dial clockwise.

The <MAIN/MON.2 MONITOR SET> screen is displayed.

SETTINGS

English

Page 91

Image 91

Sanyo DSR-3506P manual Setting the main monitor and monitor, Specify Time Period a and Time Period B

Contents

Page Avoiding Electrical Shock and Fire PrecautionService Location Introduction Main featuresAccessories Symbols used in this manual Contents Other Contents Settings „ Notes on replacing the HDD Before USE„ Handling a detached HDD unit Important recordings Backup batteryBefore USE Hard disk and cooling fan are consumable components Front panel Names and Functions of Parts Names and Functions of Parts Rear panel Basic connections Installation and ConnectionsConnecting an amplifier Connecting Alarm in terminals Connecting the power cord Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting control terminals Preparing for USE 01-01-04 000000 REC Reperat EN a AlarmOperation display area Press the OSD button several times Preparing for USEChanging the position of the operation display area Changing the language Press the Exit button Setting the timeExample Setting 830 on 22 May Turn the shuttle dial clockwise Normal recording area Alarm recording areaPreparing for USE The internal hard disk Hard disk recording areas Press the No Camera Select button Viewing Video from a CameraViewing on a full screen Viewing on multiple screens Press the Sequence button Viewing Video from a CameraViewing with automatic screen selection Press the Multi button Viewing on the monitor Set MON.2 Display from Alarm Operation SET to ON. JP.74Press the MON2 button Normal recording Timer recordingPress the Timer button Recording When an alarm signal is detected Alarm recordingSet alarm recording End alarm recording If an alarm is detected Pre-alarm recordingSet pre-alarm recording After entering the setting, press the Exit button Changing the playback speed PlaybackPlaying video on a full screen Fast-forward and fast-rewind playback Move the zoom frame to the area to be magnified PlaybackEnlarging the playback video Press the Zoom button during playback Press the Still button during playback Viewing still imagesPerforming frame advance forward or reverse Press the Zoom button Press the Quad button during playback Playing video on multiple screensPress the Multi button during playback Searching for Recorded Video To view alarm video before or after the current playback Alarm searchPress the appropriate Alarm button during playback „ To view pre-alarm video Turn the jog dial to select TIME/DATE Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date search Search Recording TOPRecording END Channel Turn the jog dial to select the video for playback Search indicator lights and Search screen is displayedArchive area search Motion detection search Motion Sensor Example Normal Cursor moves to ChannelStart END ‹OFF Motion sensor setting screen is displayedSet the motion sensor to use for searching OFF flashes „ If not FOUND! is displayed Carry out motion sensor setting againDisplay returns to the Motion Detection Search screen Copying video to the hard disk’s archive area JP.35 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.36 Example Copying a specified 10-second portion of video Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy button Insertion method Removal method „ To cancel a copy operationTurn the jog dial to select Seconds Insert a CompactFlash card Archive Area flashes Copy screen is displayed Images copied to a CompactFlash card Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Jpeg images Turn the jog dial to select a menu Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Basic menu operations Restoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Main menu Turn the jog dial to select the item to Sub-menu configurationBe set, and then turn the shuttle dial Clockwise Color Level JP.93 Sub menu Setting item Settings or display contentMulti Screen JP.87 Sequence SET Initial SET Initial settingsSetting the summer time Initial SET is used to make the following setting When USE is selected for Summer Time SET Turn the jog dial to change the settingsInitial SET To C Terminal To Clock SET in terminal External clock settingCursor moves to the month Cursor moves to the time Example Detecting connected cameras Turn the jog dial to select H Setting camera titlesExample Setting the title HALL-1F for Camera No First position for title setting flashes Example Setting 17 November as a holiday Setting holidays Day Turn the shuttle dial clockwise after settingSet the day and month for item No Month Setting time periods Time Period B settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period a settings Set T1 to 6 AM Time Period a flashes Time period operations settingsCursor moves to Mask Record SET Settings for recordingPerforming easy setup Record SET is used to make the following settings Record SET Setting based on recording daysEasy Setup screen is displayed Cursor moves to Timer Recording DAY Set Audio Recording Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Picture Quality Setting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas See P.55 „ If the normal recording area is set to 0% „ Default hard disk settingsChanging recording areas „ Recording area allocations Setting overwrite permission No on the Warning screen flashes Flashing Setting recording conditionsOn flashes Turn the jog dial to select the storage period Setting auto deleting01-01-04 000000 REC 1% Turn the shuttle dial clockwise Press the Exit button Setting normal recordingClockwise Program Setting program recordingSet REC Rate Set REC Program Group Recording rate flashes Cursor moves to 01 from Serect Individual Camera Rate FPSVideo from Camera No will not be recorded Timer setting items Timer settingsStart Timer reservations spanning more than 24 hours „ To change a displayed setting item„ Picture quality and recording rate for timer recording To cancel all set timer reservations For FPS flashes Make settings in the Week and Start columnsTimer recording using an external timer OFF for Program flashes OFF flashes Setting alarm recordingTo set alarm recording Dial clockwise Recording pattern for SW and only Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Set REC Rate and Duration Cursor moves to recording rate and duration When alarm recording settings have been completedTo set pre-alarm recording REC Rate for PRE-ALARM Recording flashes Use this setting to indicate how alarms are to be detected When pre-alarm recording settings have been completedSetting the alarm trigger Default setting 1 MIN Cursor moves to Alarm Trigger Level Setting the motion sensorsUse this procedure to set other sensor positions Press the Camera Select button To B Flashes for the ModeCursor moves to Level OFF flashes for Level „ To stop motion sensor recording Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example Alarm Setting alarm display Canceling alarmsCursor moves to Alarm Priority General SET General settingsSetting data display 01-01-04 000000 REC 1% EN a Alarm General SET Setting display for video lossPerform the following if so required Disk Error default setting on Setting the buzzerAlarm default setting OFF Disk Full default setting on Setting the administrator password Setting the security lockUse the same procedure to set 123456AB „ Operation after setting passwords Then turn the shuttle dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Turn the jog dial clockwise Initializing the hard disk Setting and initializing the hard diskSetting the security lock Canceling the security lock Expanding the hard disk capacity Network settingsMaking network connections OFF flashes for Network Control Making network settingsConnecting to an intranet using a hub Network SET screen is displayed Set Port Set IP AddressSet Subnet Mask Set Gateway Cursor moves to Status Info Setting RS-485Enter the password using the shuttle dial and jog dial General SET screen appears Speed Setting procedure is ended and the display returns toNormal screen ‹DATA Example Displaying Camera No in quad position Setting quad and multi 6 displaySetting quad positions Screen SET Changes to Setting multi 6 positionsScreen SET Checking modified screen positions 1S flashes for Full Example Automatic switching of a full screen every 5 seconds Specify Time Period a and Time Period B Setting the main monitor and monitorMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Starts to flash for Time Period Setting masksCursor moves to Mask SET Mask SET screen is displayed OFF flashes Settings ‹ indicates the default setting Setting the color levelColor Level SET screen is displayed ‹AUTO Auto flashes DISK1 USE Power FAILURE/USED TimeFAILURE/RECOVER Power Area Initialized RecordOperation class Load Menus from CF Copy Menu SettingsSaving menu settings on a CompactFlash card Save Menus to CF Turn the jog dial to select Load Copy Menu SettingsLoading settings from a CompactFlash card When copying recording area settings RS-485 specifications Interface SpecificationsRS-485 termination switch settings DVR/VCR command table Interface Specifications XXX SpecificationsSpecifications Jpeg Dimensions SpecificationsUnits mm 364.5 420 349 „ Example Recording to a 80 GB hard disk 100%-usage Table of recording rate and times„ Example After expansion to 160 GB 100%-usage „ Example After expansion to 300 GB 100%-usage 104 Program recording rate Table of recording rate settings Minutes 10s 20s 40s Table of pre-alarm recording timesFPS field/sec Normal REC Mode SET →P.62 Menu Setting SequenceTitle SET →P.47 HDD SET →P.81 Mask SET →P.92 Menu Setting SequenceRS-485 SET →P.85 Index Index Time/date search Timer recording Timer settings

Sanyo DSR-3506P Setting the main monitor and monitor, Specify Time Period a and Time Period B

Models: DSR-3506P