5SEARCHING FOR RECORDED VIDEO
zWhen playback is performed after an alarm search, the frame at the start and end of each alarm recording will be paused.
Press the appropriate [ALARM] button to play the previous or next alarm recording.
zYou can use the
Alarm thumbnail search
Use the following procedure to display all of the alarm recordings stored in the alarm recording area as thumbnails list.
1 Press the [SEARCH] button while the digital video recorder is recording or stopped.
The SEARCH indicator lights up and the <SEARCH> screen is displayed.
SEARCH
2 Turn the jog dial to select “ALARM THUMBNAIL SEARCH”, and then turn the shuttle dial clockwise.
The nine
0016 | 0015 | 0014 |
0013 | 0012 | 0011 |
0010 | 0009 | 0008 |
3 Turn the jog dial to move the cursor and select the alarm recording for playback.
The alarm number for the selected recording will start to flash.
zTo display the next or previous recording
Turn the jog dial clockwise or
zTo leave search mode
Press the [SEARCH] button. SEARCH indicator turns off.
4 Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
zIn the same way as for alarm searching, playback is only possible within each individual alarm recording. Press the appropriate [ALARM] button to play the previous or next recording.
zYou can use the
Time/date search
Use the following procedure to play a recording from the normal recording area (i.e., a normal recording or timer recording) or alarm recording area by specifying its date and time.
1 Press the [SEARCH] button while the digital video recorder is recording or stopped.
The SEARCH indicator lights up and the <SEARCH> screen is displayed.
SEARCH
2 Turn the jog dial to select “TIME/DATE SEARCH”.
OPERATION
28 | English |
