Preparing for USE, Changing the language | Sanyo DSR-3506P guide

1PREPARING FOR USE

Changing the position of the operation display area

1 Press the [OSD] button several times.

As the [OSD] button is pressed, the operation display area moves to a different location or is hidden.

Top (default)	01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
Bottom	01	02
	01	02
Hidden
Operation	01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
display area	03	04

Changing the language

Use the following procedure to set the language displayed on the monitor.

[Settings] ( indicates default setting.)

	Item	Setting	Description
		ENGLISH	Sets the language to English.

	LANGUAGE	ESPAÑOL	Sets the language to Spanish.

		DEUTSCH	Sets the language to German.
		DEUTSCH	Sets the language to German.

		FRANCAIS	Sets the language to French.

1 Press the [MENU] button.

The MENU indicator lights up and the <MAIN MENU> is displayed.

MENU

2 Turn the jog dial to select “1. INITIAL SET”, and then turn the shuttle dial clockwise.

The <INITIAL SET> screen is displayed.

3 Turn the jog dial to select “1. LANGUAGE/CLOCK SET”, and then turn the shuttle dial clockwise.

The cursor moves to “ENGLISH”.

4 Turn the shuttle dial clockwise, and then turn the jog dial to select the desired language.

The set item flashes.

5 When you have made a selection, turn the shuttle dial clockwise.

The cursor moves to the date and time. The language has now been set.

To return to the normal screen, press the [EXIT] button.

EXIT

English

13

Image 14

Sanyo DSR-3506P manual Preparing for USE, Changing the position of the operation display area, Changing the language

Contents

Page Location PrecautionService Avoiding Electrical Shock and Fire Symbols used in this manual Main featuresAccessories Introduction Contents Contents Settings Other „ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Hard disk and cooling fan are consumable components Backup batteryBefore USE Important recordings Names and Functions of Parts Front panel Names and Functions of Parts Rear panel Connecting Alarm in terminals Installation and ConnectionsConnecting an amplifier Basic connections Connecting control terminals Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting the power cord Operation display area 01-01-04 000000 REC Reperat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the position of the operation display area Press the OSD button several times Turn the shuttle dial clockwise Setting the timeExample Setting 830 on 22 May Press the Exit button Hard disk recording areas Alarm recording areaPreparing for USE The internal hard disk Normal recording area Viewing on multiple screens Viewing Video from a CameraViewing on a full screen Press the No Camera Select button Press the Multi button Viewing Video from a CameraViewing with automatic screen selection Press the Sequence button Press the MON2 button Set MON.2 Display from Alarm Operation SET to ON. JP.74Viewing on the monitor Recording Timer recordingPress the Timer button Normal recording End alarm recording Alarm recordingSet alarm recording When an alarm signal is detected After entering the setting, press the Exit button Pre-alarm recordingSet pre-alarm recording If an alarm is detected Fast-forward and fast-rewind playback PlaybackPlaying video on a full screen Changing the playback speed Press the Zoom button during playback PlaybackEnlarging the playback video Move the zoom frame to the area to be magnified Press the Zoom button Viewing still imagesPerforming frame advance forward or reverse Press the Still button during playback Press the Multi button during playback Playing video on multiple screensPress the Quad button during playback Searching for Recorded Video „ To view pre-alarm video Alarm searchPress the appropriate Alarm button during playback To view alarm video before or after the current playback Time/date search Alarm thumbnail searchAlarm number for the selected recording will start to flash Turn the jog dial to select TIME/DATE Search Channel Recording TOPRecording END Search Motion detection search Search indicator lights and Search screen is displayedArchive area search Turn the jog dial to select the video for playback END Example Normal Cursor moves to ChannelStart Motion Sensor OFF flashes Motion sensor setting screen is displayedSet the motion sensor to use for searching ‹OFF Display returns to the Motion Detection Search screen Carry out motion sensor setting again„ If not FOUND! is displayed Copying video to a CompactFlash card or Microdrive JP.36 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.35 Press the Copy button Saving Copying Recorded VideoCopying video to the hard disk’s archive area Example Copying a specified 10-second portion of video Insert a CompactFlash card „ To cancel a copy operationTurn the jog dial to select Seconds Insertion method Removal method Copy screen is displayed Archive Area flashes Jpeg images Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Images copied to a CompactFlash card Basic menu operations Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Turn the jog dial to select a menu Movement and confirmation in sub-menus and setting screens Menu Configuration and OperationsRestoring menu setting items to their default values Be set, and then turn the shuttle dial Clockwise Sub-menu configurationMain menu Turn the jog dial to select the item to Sequence SET Sub menu Setting item Settings or display contentMulti Screen JP.87 Color Level JP.93 Initial SET is used to make the following setting Initial settingsSetting the summer time Initial SET Initial SET Turn the jog dial to change the settingsWhen USE is selected for Summer Time SET Cursor moves to the time External clock settingCursor moves to the month To C Terminal To Clock SET in terminal Detecting connected cameras Example First position for title setting flashes Setting camera titlesExample Setting the title HALL-1F for Camera No Turn the jog dial to select H Setting holidays Example Setting 17 November as a holiday Month Turn the shuttle dial clockwise after settingSet the day and month for item No Day Setting time periods Time Period a settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period B settings Set T1 to 6 AM Cursor moves to Mask Time period operations settingsTime Period a flashes Record SET is used to make the following settings Settings for recordingPerforming easy setup Record SET Cursor moves to Timer Recording DAY Setting based on recording daysEasy Setup screen is displayed Record SET Set Picture Quality Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Audio Recording Setting based on recording rate See P.55 AlarmDisplaying the recording areas Recording Area SET screen is displayed „ Recording area allocations „ Default hard disk settingsChanging recording areas „ If the normal recording area is set to 0% Setting overwrite permission On flashes Setting recording conditionsNo on the Warning screen flashes Flashing 01-01-04 000000 REC 1% Setting auto deletingTurn the jog dial to select the storage period Clockwise Setting normal recordingTurn the shuttle dial clockwise Press the Exit button Set REC Program Group Setting program recordingSet REC Rate Program Video from Camera No will not be recorded Cursor moves to 01 from Serect Individual Camera Rate FPSRecording rate flashes Start Timer settingsTimer setting items To cancel all set timer reservations „ To change a displayed setting item„ Picture quality and recording rate for timer recording Timer reservations spanning more than 24 hours OFF for Program flashes Make settings in the Week and Start columnsTimer recording using an external timer For FPS flashes Dial clockwise Setting alarm recordingTo set alarm recording OFF flashes Set REC Rate and Duration Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Recording pattern for SW and only REC Rate for PRE-ALARM Recording flashes When alarm recording settings have been completedTo set pre-alarm recording Cursor moves to recording rate and duration Default setting 1 MIN Cursor moves to Alarm Trigger When pre-alarm recording settings have been completedSetting the alarm trigger Use this setting to indicate how alarms are to be detected Press the Camera Select button Setting the motion sensorsUse this procedure to set other sensor positions Level OFF flashes for Level Flashes for the ModeCursor moves to Level To B Example Alarm Setting alarm operation and displayOFF flashes in the Alarm Retrigger field „ To stop motion sensor recording Cursor moves to Alarm Priority Canceling alarmsSetting alarm display 01-01-04 000000 REC 1% EN a Alarm General settingsSetting data display General SET Perform the following if so required Setting display for video lossGeneral SET Disk Full default setting on Setting the buzzerAlarm default setting OFF Disk Error default setting on „ Operation after setting passwords Setting the security lockUse the same procedure to set 123456AB Setting the administrator password Turn the jog dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Then turn the shuttle dial clockwise Canceling the security lock Setting and initializing the hard diskSetting the security lock Initializing the hard disk Making network connections Network settingsExpanding the hard disk capacity Network SET screen is displayed Making network settingsConnecting to an intranet using a hub OFF flashes for Network Control Set Gateway Set IP AddressSet Subnet Mask Set Port General SET screen appears Setting RS-485Enter the password using the shuttle dial and jog dial Cursor moves to Status Info ‹DATA Setting procedure is ended and the display returns toNormal screen Speed Screen SET Setting quad and multi 6 displaySetting quad positions Example Displaying Camera No in quad position Checking modified screen positions Setting multi 6 positionsScreen SET Changes to Example Automatic switching of a full screen every 5 seconds 1S flashes for Full MAIN/MON.2 Monitor SET screen is displayed Setting the main monitor and monitorSpecify Time Period a and Time Period B Starts to flash for the time period Mask SET screen is displayed Setting masksCursor moves to Mask SET Starts to flash for Time Period Color Level SET screen is displayed Setting the color levelOFF flashes Settings ‹ indicates the default setting Auto flashes ‹AUTO Power Power FAILURE/USED TimeFAILURE/RECOVER DISK1 USE Operation class Initialized RecordArea Save Menus to CF Copy Menu SettingsSaving menu settings on a CompactFlash card Load Menus from CF When copying recording area settings Copy Menu SettingsLoading settings from a CompactFlash card Turn the jog dial to select Load RS-485 termination switch settings Interface SpecificationsRS-485 specifications Interface Specifications DVR/VCR command table Jpeg SpecificationsSpecifications XXX Units mm 364.5 420 349 SpecificationsDimensions „ Example After expansion to 160 GB 100%-usage Table of recording rate and times„ Example Recording to a 80 GB hard disk 100%-usage 104 „ Example After expansion to 300 GB 100%-usage Table of recording rate settings Program recording rate FPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s Title SET →P.47 Menu Setting SequenceNormal REC Mode SET →P.62 RS-485 SET →P.85 Menu Setting SequenceHDD SET →P.81 Mask SET →P.92 Index Time/date search Timer recording Timer settings Index