Sanyo DSR-3506P manual „ To change a displayed setting item, To cancel all set timer reservations

Models: DSR-3506P

1 112
Download 112 pages 54.62 Kb
Page 67
Image 67

3RECORD SET

4 Turn the jog dial to set “SUN” to “DLY”, and then turn the shuttle dial clockwise.

The start time flashes as “--:--”.

5 Repeat steps 3 and 4 to set the remaining items using the shuttle dial and jog dial.

„To change a displayed setting item

Turn the shuttle dial in the required direction to select the item to be changed, and then turn the jog dial to change the setting.

„Picture quality and recording rate for timer recording

zPicture quality is set using “PICTURE QUALITY” from the “4. NORMAL REC MODE SET”. (JP.62)

zWhen program recording is set to “OFF”, the “REC RATE” from the 4. NORMAL REC MODE SET sub- menu is used. (P.62)

6 Press the [EXIT] button when all of the necessary settings have been made.

The display returns to the normal screen.

EXIT

„To set different recording times and/or recording rates for each day of the week

Set the desired recording times and recording rate for each day.

zIf specific days are set as holidays, the operation for Sunday will be used on those days also. (JP.48)

zIf timer settings overlap, recording is performed in the following sequence.

Each daily reservation DLY EXT Priority (high) ←−−−−−−−−−−−−→ (low)

zIf a reservation for a particular day overlaps with a daily reservation, priority is given to that with the earliest start time. If both have the same start time, priority is given to that with the highest setting position in the menu.

To cancel all set timer reservations

1 Press the [MENU RESET] button with the <TIMER SET> screen displayed.

All setting items are cleared.

[MENU RESET] button

Timer reservations spanning more than 24 hours

Use the following procedures to set timer recordings spanning more than 24 hours. The 7th (SAT) and 8th (DLY) lines from the <TIMER SET> screen are used for this purpose.

Example:

Timer recording from 10:30 on Monday to 20:30 on Wednesday with a recording rate of 5 FPS.

1 Turn the jog dial to select line 7 (SAT), and then turn the shuttle dial clockwise.

“SAT” from the “WEEK” column flashes.

You can change the setting of the flashing item.

Line 7

SETTINGS

66

English

Page 67
Image 67
Sanyo DSR-3506P manual „ To change a displayed setting item, „ Picture quality and recording rate for timer recording