4GENERAL SET

zNetwork control is only possible when “NETWORK CONTROL” has been set to “ON”.

zIn order to prevent network control while the digital video recorder is connected to a network, set “NETWORK CONTROL” to “OFF”.

The following settings are carried out using the shuttle dial and jog dial.

zVertical cursor movement: Turn the jog dial.

zCursor movement to the right: Turn the shuttle dial clockwise.

zModification of values : Turn the shuttle dial clockwise, and then with the setting value flashing, turn the jog dial.

zConfirmation of values : Turn the shuttle dial clockwise.

6 Set “IP ADDRESS”.

(Default setting: 192. 168. 0. 1)

7 Set “SUBNET MASK”.

(Default setting: 255. 255. 255. 0)

8 Set “GATEWAY”.

(Default setting: 0. 0. 0. 0)

9 Set “PORT”.

(Default setting: 00080)

When connecting the digital video recorder to a network, check the following settings with the network administrator.

zIP ADDRESS

zSUBNET MASK

zGATEWAY

zPORT

Setting passwords for the network

Three access levels are setup for network connection, and a password is set for each. Passwords comprise between 4 and 8 alphanumeric characters.

z“ID” or “PASSWORD (4-8)” at the top of the screen is the screen title. You cannot move the cursor to this item.

Example:

Setting “AB123456” to “ID1”

1 Turn the jog dial to select “ID 1”.

[Settings]

Setting

Description

Default setting

 

 

 

ID1

Allows video to be monitored via

1111----

the network.

 

 

 

 

 

 

Allows video to be monitored and

 

ID2

the playback or search/playback of

2222----

 

recordings via the network.

 

 

 

 

 

Allows all of this recorder’s

 

ID3

operations and settings to be

3333----

 

performed.

 

 

 

 

2 Turn the shuttle dial clockwise.

The first password entry item “1” flashes.

Characters that can be entered in passwords: 0 to 9, A to Z

SETTINGS

84

English

Page 85
Image 85
Sanyo DSR-3506P manual Set IP Address, Set Subnet Mask, Set Gateway, Set Port, Turn the jog dial to select ID