3RECORD SET
The following settings are carried out using the shuttle dial and jog dial.
zVertical cursor movement: Turn the jog dial.
zCursor movement to the right: Turn the shuttle dial clockwise.
zModification of values: Turn the shuttle dial clockwise, and then with the setting value flashing, turn the jog dial.
zConfirmation of values: Turn the shuttle dial clockwise.
3 Set “ALARM RECORDING AREA” to 49%.
4 Move the cursor to “AREA FULL RESET”.
5 Turn the shuttle dial clockwise.
<WARNING> screen is displayed. The screen contains a message regarding initialization of the hard disk.
6 To change the recording area, turn the jog dial to display “YES”.
zIf the shuttle dial is turned clockwise while “NO” is selected, the <RECORDING AREA SET> screen will be displayed and the recording capacities will revert to their previous settings. In other words, the new settings will not be adopted.
7 Turn the shuttle dial clockwise.
(1) The hard disk is initialized.
(2)The <RECORDING AREA SET> screen appears and the modified recording capacities are adopted.
8 Press the [EXIT] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT
Setting overwrite permission
By default, when all of the space in the hard disk’s normal recording area and alarm recording area has been used up, repetitive overwriting is automatically started (resulting in the older data being replaced).
However, it may be desirable to prevent overwriting in such a case when recorded video is to be checked. To do this, follow the procedure described below to allow only a single overwrite for each recording area.
1 Set the items in “Setting normal recording area overwriting and displaying the remaining capacity on the operation display area”. (JP.60)
The remaining hard disk capacity is displayed, and simultaneously either the FULL indicator or the ALARM FULL indicator will begin to flash.
English | 59 |