3RECORD SET

7 Turn the shuttle dial clockwise.

“OFF” flashes.

8 To activate timer operation, turn the jog dial to select “ON”, and then turn the shuttle dial clockwise.

The cursor moves to “START”.

The following settings are carried out using the shuttle dial and jog dial.

zVertical cursor movement: Turn the jog dial.

zCursor movement to the right: Turn the shuttle dial clockwise.

zModification of values: Turn the shuttle dial clockwise, and then with the setting value flashing, turn the jog dial.

zConfirmation of values: Turn the shuttle dial clockwise.

If timer recording has been set to “ON”, the timer’s “START” and “STOP” should now be set.

9 Set “PICTURE QUALITY”.

[Settings] (‹ indicates the default setting)

Setting

Description

 

 

BASIC (BA)

15 kB

 

 

NORMAL (NO)

22 kB

 

 

‹ENHANCED(EN)

30 kB

 

 

FINE (FI)

42 kB

 

 

SUPER FINE (SF)

50 kB

 

 

10 Set “AUDIO RECORDING”.

(Example: ON)

[Settings] (‹ indicates the default setting)

 

Setting

Description

 

 

 

 

 

‹OFF

Audio recording is not carried out.

 

 

 

 

 

 

ON

Audio recording is carried out.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

zAudio recording can only be specified when the recording rate is 1.00 FPS or greater.

zWhen set to “ON”, the letter “A (indicating that audio will be recorded)” is displayed in front of recording rate. As both video and audio will be stored in the normal recording area, this area’s overall capacity will reduce accordingly.

11 Turn the shuttle dial counter-clockwise.

<WARNING> screen is displayed.

12 Turn the jog dial to select “YES”, and then turn the shuttle dial clockwise.

The display returns to the <EASY SETUP> screen.

English

55

Page 56
Image 56
Sanyo DSR-3506P manual Set Picture Quality, Set Audio Recording, Turn the shuttle dial counter-clockwise